Manual Junker JM26AA51 (page 22 of 56) (English, German, Dutch, French)

636786

Zoom out

Zoom in

1/56

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate bearing these numbers can

be found on the right-hand side when you open the appliance

door. To save time, you can make a note of the number of your

appliance and the telephone number of the after-sales service

in the space below, should it be required.

Please note that there will be a fee for a visit by a service

technician in the event of a malfunction, even during the

warranty period.

After-sales contact details for all countries can be found in the

attached after-sales service directory.

This appliance corresponds to the standards EN 55011 and

CISPR 11. It is a Group 2, Class B product.

Group 2 means that microwaves are produced for the purpose

of heating food. Class B states that the appliance is suitable for

private households.

Technical data

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.

Automatic programmes

You can use the automatic programmes to defrost food with

the greatest of ease and prepare dishes quickly and easily. You

select the programme and enter the weight of your food. The

automatic programme makes the optimum setting. You can

select from 7 programmes.

Setting a programme

Once you have selected a programme, make settings as

follows:

1. Press the "g" button repeatedly until the required programme

number appears.

The appliance is not in operation. A

cooking time appears in the display.

The rotary selector was accidentally pressed. Press the Stop button.

The Start button was not pressed after the set-

ting was made.

Press the Start button or clear the setting

by pressing the Stop button.

The microwave does not work. The door was not fully closed. Check whether food remains or foreign

material is trapped in the door.

The Start button was not pressed. Press the Start button.

The food takes longer than usual to

heat up

The microwave power setting was too low. Select a higher microwave power setting.

You have placed a larger amount of food than

normal in the appliance.

Double the amount = double the cooking

time.

The food was colder than usual. Stir or turn the food during cooking

The turntable is making a scratching

or grinding noise.

There is dirt or a foreign object in the area

around the turntable drive.

Clean the roller ring and recess in the

cooking compartment.

Microwave operation has been can-

celled for no apparent reason.

The microwave has a fault. If this fault occurs repeatedly, please call

the after-sales service.

Error message Possible cause Remedy/Note

E no.

FD no.

After-sales service

Input voltage AC 230 V 50 Hz

Power consumption 1450 W

Maximum output power 900 W

Microwave frequency 2450 MHz

Fuse 10 A

Dimensions (HxWxD)

 appliance 280 x 513 x 405 mm

 cooking compartment 215 x 337 x 354 mm

VDE approved yes

CE mark yes

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning used

electrical and electronic appliances (waste electrical

and electronic equipment - WEEE). The guideline

determines the framework for the return and recycling

of used appliances as applicable throughout the EU.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junker JM26AA51 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junker JM26AA51 Manual

Product: