Manual Junker JD69SE50 (page 15 of 40) (English, German, Dutch, French)

636944

Zoom out

Zoom in

1/40

Cleaning and care

: Risk of burns, risk of electric shock!

from appliance. Always leave appliance to cool down before

cleaning or servicing. Switch off fuse or pull out mains plug.

Caution!

■ Risk of damage due to ingress of humidity into the electronic

circuitry. Never clean operator controls with a wet cloth.

■ Surface damage due to incorrect cleaning. Clean stainless

steel surfaces in the grain direction only. Do not use any

stainless steel cleaners for operator controls.

■ Surface damage due to strong or abrasive cleaning agents.

Never use strong and abrasive cleaning agents.

Cleaning the appliance surface

Suitable cleaning agents and care products for your appliance

can be purchased via the Hotline or from the Online Shop (see

the start of the instructions for use).

Note: The appliance surface and controls are scratch-sensitive.

Observe the warranty regulations in the enclosed service

booklet and the following cleaning instructions:

■ Clean the surfaces with a soft, damp cloth, washing-up liquid

or a mild window cleaner. Soften dried dirt with a damp cloth.

Do not scratch.

■ Dry cloths, abrasive sponges, scouring agents, cleaning

agents containing sand, soda, acid, chlorine or any other

aggressive substances are not suitable.

■ Clean stainless steel surfaces in the direction of the grain

only.

■ Do not use stainless steel cleaner or wet cloths for the

controls.

Cleaning the metal mesh grease filters

The inserted metal mesh grease filters absorb the grease

particles from the kitchen fumes. Clean the metal mesh grease

filters under normal use (1 to 2 hours daily) approx. every three

months.

Notes

■ Do not use any aggressive, acidic or alkaline cleaning

agents.

■ When cleaning the metal mesh grease filters, also clean the

holder for the metal mesh grease filters in the appliance

using a damp cloth.

■ The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has no effect

on the function of the metal mesh grease filters.

■ Do not clean heavily soiled metal mesh grease filters together

with utensils.

■ Place the metal mesh grease filters loosely in the dishwasher.

The metal mesh grease filters must not be wedged in.

By hand:

Note: You can use a special grease solvent for stubborn dirt. It

can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy solution.

■ Clean the filters with a brush and then rinse them thoroughly.

■ Leave the metal mesh grease filters to drain.

Replacing bulbs

: Risk of burns, risk of electric shock!

from defective bulbs. Switch off the fuse or pull out the mains

plug. Always replace defective bulbs immediately (leave bulbs

to cool down first) to prevent the remaining bulbs from

overloading.

Important Only use a bulb of the same type and same power

(see the bulb holder or rating plate inside the appliance) – to

do this, remove the metal mesh grease filter.

Replacing halogen bulbs

Note: When inserting halogen bulbs, do not touch the glass

tube. Use a clean cloth to insert the halogen bulbs.

1. Carefully remove the bulb ring using a suitable tool.

2. Pull out the bulb and replace it with a bulb of the same type.

3. Insert the bulb cover.

4. Insert the mains plug or switch on the fuse again.

LED lights

Defective LED lights may be replaced by the manufacturer, their

customer service or a qualified technician (electrician) only.

: Risk of injury!

from the glare of an LED in risk group 1. Do not look directly

into the LED light for longer than 100 seconds while it is

switched on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junker JD69SE50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junker JD69SE50 Manual

Product: