Manual Junker JD69KE52 (page 25 of 52) (English, German, Dutch, French)

636946

Zoom out

Zoom in

1/52

Removing the safety caps

If the safety caps must be removed, use a flat screwdriver.

Connecting the pipes

Note: If using an aluminium pipe, smooth the connection area

beforehand.

Exhaust-air pipe Ø 150 mm (recommended size)

Attach the exhaust-air pipe directly to the air-pipe connector

and seal.

Exhaust-air pipe Ø 120 mm

1. Attach the reducing connector directly to the air-pipe

connector.

2. Attach the exhaust air pipe to the reducing connector.

3. Seal both joints appropriately.

Attaching the flue duct

: Risk of injury!

From sharp edges during installation. Always wear protective

gloves while installing the appliance.

1. Separate the flue ducts.

To do this, remove the adhesive tape.

2. Remove the protective foil from both flue ducts.

3. Push one flue duct into the other.

Notes

■ To prevent scratches, lay paper over the edges of the lower

flue duct to protect the surface.

■ Slots of the inner flue duct point downwards.

4. Place flue ducts on the appliance.

5. Push the inner flue duct upwards and attach it to the fixing

brackets on the left and right.

6. Press the flue duct downwards until it engages. ©

7. Screw the flue duct to the sides of the fixing bracket using

two screws.

[

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junker JD69KE52 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junker JD69KE52 Manual

Product: