Manual Junker JD69GW52 (page 16 of 52) (English, German, Dutch, French)

636943

Zoom out

Zoom in

1/52

Risk of electric shock!

■

A defective appliance may cause electric

shock. Never switch on a defective

appliance. Unplug the appliance from the

mains or switch off the circuit breaker in

the fuse box. Contact the after-sales

service.

Risk of electric shock!

■

Incorrect repairs are dangerous. Repairs

may only be carried out and damaged

power cables replaced by one of our

trained after-sales technicians. If the

appliance is defective, unplug the

appliance from the mains or switch off the

circuit breaker in the fuse box. Contact the

after-sales service.

Risk of electric shock!

■

Penetrating moisture may cause an

electric shock. Do not use any high-

pressure cleaners or steam cleaners.

Causes of damage

Caution!

Risk of damage due to corrosion. Always switch on the

appliance while cooking to avoid condensation. Condensate

can produce corrosion damage.

Always replace faulty bulbs to prevent the remaining bulbs from

overloading.

Risk of damage due to ingress of humidity into the electronic

circuitry. Never clean operator controls with a wet cloth.

Surface damage due to incorrect cleaning. Clean stainless

steel surfaces in the direction of the grain only. Do not use any

stainless steel cleaners for operator controls.

Surface damage due to strong or abrasive cleaning agents.

Never use strong and abrasive cleaning agents.

Risk of damage from returning condensate. Install the exhaust

duct in such a way that it falls away from the appliance slightly

(1° slope).

Environmental protection

Unpack the appliance and dispose of the packaging in an

environmentally-responsible manner.

Environmental protection

Operating modes

This appliance can be used in exhaust-air mode or circulating-

air mode.

Exhaust air mode

Note: The exhaust air must not be conveyed into a functioning

smoke or exhaust gas flue or into a shaft which is used to

ventilate installation rooms which contain heat-producing

appliances.

■ Before conveying the exhaust air into a non-functioning

smoke or exhaust gas flue, obtain the consent of the heating

engineer responsible.

■ If the exhaust air is conveyed through the outer wall, a

telescopic wall box should be used.

Circulating-air mode

Notes

■ To bind odours in circulating-air mode, you must install an

activated carbon filter. The different options for operating the

appliance in circulating-air mode can be found in the

brochure. Alternatively, ask your dealer. The required

accessories are available from specialist retailers, from

customer service or from the Online Shop.

■ For appliances with an additional internal filter, only the

CleanAir recirculation module (see Accessories for

circulating-air mode) can be used.

This appliance is labelled in accordance with the

European Directive 2012/19/EU concerning used

electrical and electronic appliances (WEEE –

waste electrical and electronic equipment). The

guideline determines the framework for the return

and recycling of used appliances as applicable.

The air which is drawn in is cleaned by the

grease filters and conveyed to the exterior

by a pipe system.

The air which is drawn in is cleaned by the

grease filters and an activated carbon filter

and conveyed back into the kitchen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junker JD69GW52 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junker JD69GW52 Manual

Product: