Manual Junker JB33DP50 (page 46 of 52) (English, Dutch)

636800

Zoom out

Zoom in

1/52

: Risk of fire!

The outside of the oven becomes very hot. Make sure that

nothing is placed against the front of the oven. Never hang

flammable objects, e.g. tea towels, on the door handle. Keep

children at a safe distance.

Before cleaning

The oven must be empty. Take any accessories, ovenware and

shelves out of the oven. Please see the Care and cleaning

section for how to unhook the rails.

Clean the oven door and the along the edges of the cooking

compartment in the area around the seal. Do not scrub the

seal.

Make sure that the oven door is closed before you start

cleaning.

: Risk of fire!

Loose food residues, grease and meat juices may catch fire.

Wipe out the cooking compartment with a damp cloth.

Cleaning accessories at the same time

The shelves are not suitable for the self-cleaning programme.

Take them out of the cooking compartment. If you wish to clean

accessories at the same time, you can buy accessory holders.

You can obtain the accessory holders from the after-sales

service or on the internet using the material number 466546.

The accessory holders are inserted on the left- and right-hand

sides.

You can use the holder to clean enamelled accessories without

a non-stick coating at the same time, e.g. the universal pan.

Always only clean one accessory at a time.

Non-enamelled accessories, e.g. the wire rack, are not suitable

for the self-cleaning programme. Remove them from the

cooking compartment.

: Risk of serious damage to health.!

Never clean non-stick baking trays and baking tins at the same

time using the self-cleaning programme. High temperatures

damage the non-stick coating and poisonous gases are

released.

Note: For details on which accessories are suitable for the self-

cleaning programme, please see the optional accessory table

at the start of these instructions.

Setting the cleaning level

1. Set the operating mode selector to x. 0 appears in the

temperature display.

2. Use the temperature selector to set the cleaning level.

Pyrolytic cleaning starts after a few seconds.

The clock display shows the cleaning duration. The oven will

start up after a few seconds. The time starts counting down.

After the programme starts, the oven door locks.

Once cleaning has finished

0:00 appears in the clock display and

y flashes. Set the

operating mode selector to o and press the

KJ button once.

You can only open the oven door once the oven has cooled

down.

Cancelling cleaning

Turn the operating mode selector back to

Û. You can only open

the oven door once the oven has cooled down.

Changing the cleaning level

Once the programme has started, you can no longer change

the cleaning level.

Setting cleaning to run overnight

So that you can use your oven throughout the day, delay the

end of the cleaning process to during the night. Make settings

as described in steps 1 and 2.

1. Press the KJ clock function button until they symbol

appears.

2. Set the End of operation to a later end time using the rotary

selector.

The oven switches to standby. The display shows the time of

day. When the oven starts, you can see the time counting

down.

After cleaning

Once the cooking compartment has cooled down, wipe out the

ash that has been left behind in the cooking compartment with

a damp cloth.

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

To ensure that the different surfaces are not damaged by using

the wrong cleaning agent, observe the information in the table.

Do not use

■ aggressive or abrasive cleaning agents,

■ cleaning agents with a high concentration of alcohol,

■ hard scouring pads or sponges,

■ high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junker JB33DP50 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Junker JB33DP50

Junker JB33DP50 User Manual - German, French - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junker JB33DP50 Manual

Product: