Manual Junker JB23UA50 (page 41 of 72) (English, German, Dutch, French)

636497

Zoom out

Zoom in

1/72

Setting the time

Following a power cut or when the oven is used for the first

time, the

0 symbol and three zeros flash in the display. Set the

time. The function selector must be switched off.

Setting procedure

1. Press the 0 clock button.

12.00 appears and the

0 symbol flashes.

2. Use the + and - buttons to set the time.

After a few seconds, the time is accepted. The

0 symbol

goes out.

Changing from summer to winter time.

Press the

0 clock button twice and use the + or - buttons to

change the time.

Setting the timer.

You can use the timer as a normal kitchen timer. It operates

independently of the oven. The timer has a specific signal. This

informs you when the timer or cooking time has elapsed. You

can also set the timer if the childproof lock is active.

Setting procedure

1. Press the S timer button.

The

S symbol flashes.

2. Use the + or - buttons to set the timer time.

Default value for button + = 10 minutes

Default value for button - = 5 minutes

The timer starts after a few seconds. The

S symbol is lit in the

display. The time counts down in the display.

The time has elapsed

A signal sounds. Press the

S timer button. The timer display

goes out.

Changing the alarm time

Press the

S timer button. Use the + or - buttons to change the

time.

Delete the setting

Press the

S timer button. Press the - button until zeros appear

in the display.

The timer and the cooking time run down in synchronisation

The symbols are lit. The timer time counts down in the display.

Check the remaining

x cooking time, y end time or 0 time

of day:

Press the

0 clock button repeatedly until the relevant symbol

is displayed.

The requested value appears in the display for several

seconds.

Childproof lock

Oven

To ensure that the oven cannot be switched on by children

when playing, a childproof lock is incorporated in the

appliance.

Switching the childproof lock on and off

The function selector must be switched off.

Press the

C key button repeatedly until the C symbol

appears in the display. This procedure takes approx.

4seconds.

Deactivating: Press the

C key button repeatedly until the C

symbol goes out.

Notes

■ You can set the timer and clock at any time.

■ If the childproof lock is active, it will be cancelled following a

power cut.

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the

wrong cleaning agent can be avoided by observing the

following instructions.

When cleaning the oven do not use

■ sharp or abrasive cleaning agents,

■ cleaning agent with a high alcohol content,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junker JB23UA50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junker JB23UA50 Manual

Product: