5554
manual synchronisation process, as soon as the hands are in the 12 o’clock
position. To do this, you press the ‘SET+’ button. The hands then reset them-
selves to the original time.
Whenever manual synchronisation has been performed successfully, the
reception indicator reverts to ‘0’. If the transmitter call was not successful,
the reception indicator does not change and the hands reset themselves to
the time that was displayed before the transmitter call.
5.7 Setting the time zone
If you travel to a country with a different time zone, you can set the current
local time as the second time shown in the lower section of the LCD display
(see section 5.4), and/or adjust the analogue time display to what the time
is locally.
To do so, press the ‘MODE’ button
repeatedly until you reach ‘1st
TIME’ mode. The analogue time
being shown is now also shown
digitally in the bottom part of the
LCD display.
You adjust the time zone setting,
and thus also the position of the
hands to the time in that zone, an
hour at a time by pressing the
‘SET+’ (plus 10 hours) and ‘SET–’
(minus 13 hours) buttons. If neces-
sary, the date is also changed auto-
matically during such adjustment.
You can protect this function from
being altered accidentally by pres-
sing the ‘RESET’ button for more
than 3 seconds. A ‘lock symbol’ on
the LCD display then indicates that
the function is ‘protected’.
To enable yourself to make a new
setting, simply press the ‘RESET’
button for over 3 seconds.
