Manual Junghans Mega 1000 - J604.64 (page 10 of 153) (English, Dutch, French, Italian)

574985

Zoom out

Zoom in

1/153

5554

Your Mega 1000 provides you with the option of setting the alarm as a daily

repeating alarm (24h alarm) or as a single alarm.

Proceed as follows to set the type of alarm:

Make sure that your Mega 1000 is in ALARM mode. If

this is shown in the display, press button T1 (set+)

and T2 (set-) at the same time to start adjusting the

alarm mode. Now press the T1 (set+) or T2 (set-) but-

ton, to select the desired alarm mode. The selected

alarm mode is displayed in the upper section of the

display, SET AL 24 for the daily repeating alarm and

SET AL – for the one-off single alarm.

After you have selected the desired alarm mode, press the T4 button to return

to setting the alarm time.

The alarm can be switched off by pressing any button.

Preferably the T5 button should be used for this in order to avoid accidentally

altering the settings.

After the alarm has sounded it is no longer active and the ”ON” tag disappears.

If you want the alarm to sound again, set the desired time as described above

and reactivate the alarm.

T1T4

T2T3

6. Reception indicator

The reception indicator shows whether the watch has been synchronised with

the signals from the transmitter stations.

Make sure that one of the five time display modes is shown in the display and

if this is not the case, press T3 until one of the time display modes is shown.

Press T4 until the reception indicator is shown (time display mode 5: time,

transmitter indicator and reception indicator).

If the reception indicator reads 0 then the watch was properly synchronised

during the previous night. The numbers 1-9 show the number of days in which

watch has not been automatically synchronised due to poor reception. The

indicator returns to 0 the next time the signal is successfully received.

7. Manual Synchronisation (Calling the transmitter)

In the various time display modes, it is possible to

carry out a manual synchronisation or so called

transmitter call.

For this purpose press the T1 button for a period lon-

ger than 3 seconds. The display switches itself off

automatically when the synchronisation commen-

ces. The display will remain switched off for the

whole of the synchronisation period (maximum

14 minutes) or until the procedure is manually

discontinued.

T1T4

> 3 sec.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junghans Mega 1000 - J604.64 in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 7,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Junghans Mega 1000 - J604.64

Junghans Mega 1000 - J604.64 User Manual - German - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junghans Mega 1000 - J604.64 Manual

Product: