Manual Junghans 1972 CHRONOSCOPE Solar - J622.50 (page 8 of 122) (English, Dutch, Danish, French, Italian, Spanish)

600946

Zoom out

Zoom in

1/122

3736

Measuring split times

During the time measurement process it is possible to display a split

time without stopping the stopwatch process. To do this, start measu-

rement using the start-stop pusher (7). To read the split time operate

the reset pusher (11). The time measurement continues in the bak-

kground. Pressing the reset pusher (11) again results in the chronosco-

pe counter advancing rapidly to catch up with the time that has elap-

sed. Stop the chronoscope function by pressing the start-stop pusher

(7) again. To return the chronoscope hands to the zero position, press

the reset pusher (11).

3.6 Alarm

Pull the crown into position B. Now press the reset pusher (11) to set the

alarm time. Press the reset pusher (11) briefly for a single step and lon-

ger for continuous setting, until the required alarm time (5) is display-

ed. To start the alarm push the crown back into position A. Once the

alarm time is reached an acoustic signal is sounded for 20 seconds or

until the start-stop pusher (7) or reset pusher (11) is pushed. After the

alarm has gone off it is no longer active, the current time is displayed

until the next activation. If another alarm is required, please set this as

detailed above. Operating the start-stop pusher (7) in crown position B

results in the alarm tone sounding for the duration of the push.

3.7 Resetting the chronoscope

Following complete discharge of the energy store it is advisable to con-

duct a reset. To do this, pull the crown to position C. Ensure that the

crown is not locked. Operate the start-stop pusher (7) and the reset

pusher (11) simultaneously for at least 2 seconds. Now push the crown

back into position A. The reset is completed, now set the correct time

and date (10).

3.8 Setting the chronoscope counters to zero

If one or more of the chronoscope counters are not in the correct posi-

tion (e.g. following complete discharge of the energy store), these

should be set: pull the crown into position C. Ensure that the crown is

not locked. Now operate the reset pusher (11) to adjust the alarm

hands (5). Operate the reset pusher (11) briefly for a single step and

longer for continuous setting, until the alarm hands (5) display the cur-

rent time. If the adjustment is activated with the alarm activated but

not triggered, the alarm hands (5) will first move to the current time.

To adjust the stop minute hand (2) operate the start-stop pusher (7) for

2 seconds. The hand (2) rotates one full rotation and stops at the start

position. Now operate the reset pusher (11) to adjust the stop minute

hand (2), a short push for minute steps, a longer push for continuous

adjustment. To adjust the stop minute hand (2) operate the start-stop

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Junghans 1972 CHRONOSCOPE Solar - J622.50 in the language / languages: English, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 4,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Junghans 1972 CHRONOSCOPE Solar - J622.50

Junghans 1972 CHRONOSCOPE Solar - J622.50 User Manual - German - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Junghans 1972 CHRONOSCOPE Solar - J622.50 Manual

Product: