574983
5
Zoom out
Zoom in
Previous page
1/73
Next page
2322
Setting the chronoscope counters to zero
If one or more of the chronoscope counters is not in the correct zero
position (e.g. following battery replacement), this should be adjusted.
To do this, pull the crown to position C. All chronoscope counters move
to their start position. Activate the correction mode by operating the
start-stop pusher (6) for at least 2 seconds. The stop minute (4) rotates
360°. To set the stop minute (4) operate the reset pusher (8) briefly for
a single step and longer for continuous setting, until the stop minute
counter (4) is directly on the zero position.
To set the 1/5 second counter (2), operate the start-stop pusher (6) for
at least 2 seconds. The 1/5 second counter (2) rotates 360°. To set the
1/5 second counter (2) operate the reset pusher (8) briefly for a single
step and longer for continuous setting, until the 1/5 second counter (2)
is directly on the zero position. After correctly aligning all chronoscope
counters, press the crown back to position A.
Setting the time
Pull the crown to position C. This stops the movement. Any stopwatch
action underway will not be affected by this. To set the watch accu-
rately to the second it helps to stop the movement when the second
hand is over the 60. You can now position the minute hand precisely on
the minute marker and set the required time. Return the crown to posi-
tion A to start the second hand.
2. Quartz chronoscope J645.83
2.1 Operating elements and functions
10
2
5
2
3
4
1
9
6
5
7
8
A
B
C
1 1/5 second counter
2 Hour hand
3 Stop minute
4 Second hand
5 Minute hand
6 Start-stop pusher
7 Crown
8 24h display
9 Reset pusher
10 Date display
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junghans 1972 CHRONOSCOPE QUARZ - J645.83 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junghans 1972 CHRONOSCOPE QUARZ - J645.83 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Junghans 1972 CHRONOSCOPE QUARZ - J645.83

Junghans 1972 CHRONOSCOPE QUARZ - J645.83 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info