614754
17
Zoom out
Zoom in
Previous page
1/34
Next page
16
Threading the machine
Modo de enhebrar la máquina
Enfilage de la machine
* Raise the presser foot lifting lever to open the thread tension disk when
passing the thread through thread tension dial “3”.
* Bring the thread take-up “7” to its highest position to thread the
machine head, by turning handwheel.
* Eleve la palanca elevadora del pie prensatela para abrir el disco tensor de
hilo cuando pasa el hilo por el cuadrante “3” de tensión de hilo.
* Lleve el tirahilo “7” a su posición más alta para enhebrar el cabezal de la
máquina, girando el volante.
* Lorsque l’on fait passer le fil par le bloc-tension “3”, relever le levier de
relevage de pied presseur pour ouvrir le disque de tension.
* Relever le releveur de fil “7” au maximum pour enfiler la tête de la machine
en tournant le volant.
Pass the thread through the
thread guide (1).
When using a thread such as nylon
thread which easily slips out of the
thread path, thread the machine
head as illustrated in the circled fig-
ure.
Pase el hilo por la guía (1) del
hilo.
Cuando use un hilo tal como hilo de
nylón que se desliza fácilmente a
fuera de la trayectoria del hilo,
enhebre el cabezal de la máquina
como se ilustra en la figura en
círculo.
Faire passer le fil à travers le
guide-fil (1).
Lorsqu’on utilise un fil ayant
tendance à glisser hors du trajet du
fil, enfiler la tête de la machine de la
manière illustrée dans le médaillon.
1
Pass the thread through the
thread guides (9) and (10).
Pase el hilo por las guías del
hilo (9) y (10).
Faire passer le fil par les guide-
fil (9) et (10).
3
CAUTION: Turn OFF the power switch when threading or passing thread.
AVERTISSEMENT:
Avant d’enfiler le fil ou de le faire passer, placer l’interrupteur
d’alimentation sur arrêt.
AVISO:
Posicione en OFF el interruptor de la corriente eléctrica cuando enhebre o
pase el hilo.
Thread tension disk
Disco tensor del hilo
Disque de tension du fil
2
Pass the thread through the clear-
ance between the two thread tension
disks.
Pase el hilo por la separación entre
los dos discos tensores.
Faire passer le fil entre les deux
disques de tension.
Thread the machine head in
numerical order, (2) to (8).
Enhebre el cabezal de la
máquina en el orden numérico,
(2) al (8).
Enfiler la machine dans l’ordre
numérique (2) à (8).
Thread take-up
Tirahilo
Releveur de fil
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki TL-98Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki TL-98Q in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info