614567
22
Zoom out
Zoom in
Previous page
1/36
Next page
21
Push down the reverse feed stitch lever to sew reverse stitches over the forward stitches
for about 1cm.
Accione hacia abajo la palanca de pespunte de transporte invertido para formar punta-
das invertidas sobre las puntadas de avance más o menos 1cm.
Abaisser le levier de commando d’entraînement réversible pour exécuter des points ar-
rière sur une longueur d’environ 1cm par-dessus les points avant.
Reverse feed stitch (lock stitch)
Pespunte de transporte invertido (puntada de parada)
Exécution de points arrière (points d’arrêt)
When the sewing is nished, raise the needle and the presser foot. Then draw both the
needle and the bobbin threads away from you by approximately 10cm together with ma-
terial, after lowering the presser foot. (The needle and the bobbin threads are simultane-
ously trimmed.)
Al acabar el cosido, eleve la aguja y el prensatelas. Entonces saque los hilos de aguja
y de bobina en dirección contraria a usted aproximadamente 10cm juntamente con el
material, de pedal de corte del hilo después de bajar el prensatelas. (Los hilos de aguja
y de bobina se cortan automáticamente.)
A la n de la couture, remonter l’aiguille et le pied presseur. Tirer ensuite le l d’aiguille et
le l de canette en arrière d’environ 10cm avec le tissu. Ou sur l’interrupteur au pied de
coupe du l (le l d’aiguille et le l de canette sont coupés en même temps).
1
When making a knot on the reverse side of the material
Cuando haga un nudo en el lado equivocado del material
Comment faire un noeud à l'envers du tissu
Draw the needle thread onto the reverse side of the material. Fasten the needle thread
and the bobbin thread together. Then trim the both threads near the knot.
Saque el hilo de aguja al lado erróneo del material. Ate el hilo de aguja y el hilo de bo-
bina. Seguidamente, corte ambos hilos junto al nudo.
Tirer le l d’aiguille à l’envers du tissu. Nouer ensemble le l d’aiguille et le l de canette.
Couper ensuite les deux ls près du noeud.
2
Approx. 1cm
Aprox. 1cm
1cm environ
Material (reverse side)
Material (lado erróneo)
Tissu (envers)
Raise the presser foot, and take out the nished material.
Eleve el prensatelas, y retire el material acabado.
Relever le pied presseur et retirer le tissu ni.
5
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki TL-2010Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki TL-2010Q in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info