614572
27
Zoom out
Zoom in
Previous page
1/36
Next page
26
Install a zipper attaching foot.
Turn OFF power. Loosen the screw in the presser foot, and attach the zipper attaching
foot from the far side of the presser foot.
Instale un pie colocador de cremalleras.
Desconecte la alimentación eléctrica. Aoje el tornillo en el prensatelas, y coloque el pie
colocador de cremalleras en el lado lejano al prensatelas observando desde usted mismo.
Installer le pied de pose fermeture à glissières.
Mettre la machine hors tension. Desserrer la vis du pied presseur et poser le pied de pose
de fermeture à glissières par l’arrière de la barre de presseur vu du côté opérateur.
1
Turn the presser position selector screw to move the presser
foot until the correct needle entry point is obtained.
When sewing the left-hand side of the zipper, move the presser to the
left. When sewing the right-hand side of it, move the presser to the
right.
Gire el tornillo selector de posición del prensatelas para mov-
er el prensatelas hasta obtener el punto correcto de entrada
de la aguja.
Cuando cosa el lado izquierdo de la cremallera, mueva el prensatelas
hacia la izquierda.
Cuando cosa el lado derecho de la misma, mueva el prensatelas hacia
la derecha.
Déplacer le presseur en tournant la vis de sélection de posi-
tion du presseur jusqu’à ce que le point de pénétration de l’
aiguille soit correct.
Pour coudre le gauche de la fermeture à glissière, déplacer le
presseur vers la gauche. Pour coudre le côté droit de la fermeture à
glissière, déplacer le presseur vers la droite.
2
Screw in the
presser foot
Tornillo en el
prensatelas
Vis du pied
presseur
Presser bar
Barra del
prensatelas
Barre de
presseur
Presser position selector screw
Vis de sélection de position du presseur
Tornillo selector de posición del prensatelas
CAUTION:
Turn OFF the power switch when replacing the presser foot.
AVERTISSEMENT:
Avant de remplacer le pied presseur, placer l’interrupteur d’alimentation sur arrêt.
AVISO:
Cuando cambie el prensatelas posicione en OFF el interruptor de la corriente eléctrica.
Attaching a zipper / Modo de colocar una cremallera /
Pose d’une fermeture à glissière
1. Keep the needle at its down position.
2. Lift the presser foot, and turn the material in a desired direction.
1. Mantenga la aguja en su posición baja.
2. Eleve el prensatelas, y gire el material en la dirección deseada.
1. Maintenir l’aiguille abaissée.
2. Soulever le pied presseur et tourner le tissu dans le sens désiré.
Changing the sewing direction
Modo de combiar la dirección de cosido
Inversion du sens de la couture
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki TL-2000Qi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki TL-2000Qi in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info