614572

Juki TL-2000Qi Manual

18
Zoom out
Zoom in
Previous page
1/36
Next page
17
Threading the machine
Modo de enhebrar la máquina
Enlage de la machine
Pass the thread through the
thread guide (1).
When using a thread such as
nylon thread which easily slips
out of the thread path, thread the
machine head as illustrated in
the circled gure.
Pase el hilo por la guía (1)
del hilo.
Cuando use un hilo tal como hilo
de nylón que se desliza fácil-
mente a fuera de la trayectoria
del hilo, enhebre el cabezal de
la máquina como se ilustra en la
gura en círculo.
Faire passer le l à travers le
guide-l (1).
Lorsqu’on utilise un l ayant ten-
dance à glisser hors du trajet du
fil, enfiler la tête de la machine
de la manière illustrée dans le
médaillon.
1
Pass the thread through the
thread guides (9) and (10).
Pase el hilo por las guías del
hilo (9) y (10).
Faire passer le l par les
guide-l (9) et (10).
3
CAUTION:
Turn OFF the power switch when threading or passing thread.
AVERTISSEMENT:
Avant d’enler le l ou de le faire passer, placer l’inter-
rupteur d’alimentation sur arrêt.
AVISO:
Posicione en OFF el interruptor de la corriente eléctrica cuando en-
hebre o pase el hilo.
Thread tension disk
Disco tensor del hilo
Disque de tension du l
2
Pass the thread through the
cl ear ance betwe en th e two
thread tension disks.
Pase el hilo por la separación
entre los dos discos tensores.
Faire passer le l entre les deux
disques de tension.
Thread the machine head in
numerical order, (2) to (8).
Enhebre el cabezal de la
máquina en el orden
numérico, (2) al (8).
Enler la machine dans
l’ordre numérique (2) à (8).
1
7
8
5
6
3
4
2
9
!0
1
2
3
4
5
6
7
8
9
!0
Sub-tension knob
・
Pass the thread through the space between the
two tension disks.
・
The standard thread tension is achieved when the
end face of the screw at the center of the knob is
ush with the end face of the knob.
Perilla de subtensión
・
Pase el hilo a través del espacio entre los dos
discos de tensión.
・
La tensión de hilo estándar se obtiene cuando
la supercie extrema del tornillo en el centro
de la perilla se encuentra al ras con la supercie
extrema de la perilla.
Bouton de sous-tension
・
Faire passer le l par l’espace entre les deux
disques de tension.
・
La tension standard du l est obtenue lorsque
la face frontale de la vis au centre du bouton
s’encastre dans la face frontale du bouton.
Thread take-up
Tirahilo
Releveur de l
* To pass the thread though thread tension dial
3
, rstly raise the presser foot lifting lever and
provide a space between the tension disks.
* Bring the thread take-up
7
to the upper end of its stroke. Then, pass the thread through it.
* Para pasar el hilo a través del disco tensor
3
del hilo, primero eleve la palanca de elevación del pie
prensatelas y haga espacio entre los discos tensores.
* Haga que el tirahilo
7
se posicione en el extremo superior de su carrera. Luego, pase el hilo a
través del mismo.
* Pour faire passer le l par le molette de tension du l
3
, soulever d’abord le levier de relevage du
pied presseur et laisser un espace entre les disques de tension.
*
Ramener le relevage du l
7
à l’extrémité supérieure de sa course. Ensuite, faire passer le l à travers.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki TL-2000Qi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki TL-2000Qi in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info