614572
11
Zoom out
Zoom in
Previous page
1/36
Next page
10
Power switch
Turn ON when it is pressed on your side.
Turn OFF when it is pressed on the other side.
Interruptor de la corriente eléctrica
Se posiciona en ON cuando lo presiona en el lado hacia usted.
Se posiciona en OFF cuando lo presiona hacia el otro lado.
Interrupteur d'alimentation
Pour le mettre sur marche, appuyer dessus du côté opérateur.
Pour le mettre sur arrêt, appuyer dessus de l'autre côté.
ON
MARCHE
OFF
ARRET
Manual thread cutter
Lift the needle and the presser foot after the completion of sewing, draw out
the material, and cut the thread with the manual thread cutter.
Cuchilla para corte manual de hilo
Eleve la aguja y el pie prensatela después de completar el cosido, extraiga el
material, y corte el hilo con la cuchilla para corte manual de hilo.
Coupe-l manuel
Après la couture, relever l’aiguille et le pied presseur, retirer le tissu et couper
le l avec le coupe-l manuel.
Manual thread cutter
Cuchilla para corte
manual de hilo
Coupe-l manuel
Automatic thread trimming switch/Thread trimming foot switch
When the sewing is completed, both the needle and the bobbin threads can be
simultaneously trimmed. You can re-start sewing even if the bobbin thread does
not appear on the throat plate.
Use either one of the two switches when trimming thread.
"Thread trimming foot switch"
When the heel side of the foot controller is pressed, the threads are trimmed.
Interruptor del cortahilo automático/interruptor del pie del cortahilo
Cuando se completa el cosido, se pueden cortar simultáneamente los hilos de
bobina y de aguja. Usted puede reanudar el cosido aún cuando el hilo de bo-
bina no aparezca en la placa de agujas.
Para cortar el hilo use cualquiera de los dos interruptores.
“Interruptor de pie del cortahilos”
Cuando se presiona el lado de talón del interruptor de pie, se cortan los hilos.
Bouton de coupe automatique du l/Interrupteur au pied de coupe du
l
Après la couture, il est possible de couper les ls d’aiguille et de canette en
même temps. On peut ensuite reprendre la couture même si le l de canette n’
apparaît pas sur la plaque à aiguille.
Pour couper les ls, utiliser le bouton ou l’interrupteur au pied.
« Interrupteur au pied de coupe du l »
Lorsque le côté talon de la pédale de commande est enfoncé, les ls sont cou-
pés.
Thread trimming foot switch
Interruptor de pie del cortahilos
Interrupteur au pied de coupe du l
Speed control knob
Maximum sewing speed can be freely set by the speed controller.
Perilla de control de velocidad
Puede ajustarse libremente la velocidad máxima de costura mediante el regu-
lador de velocidad.
Bouton de régulation de la vitesse
La vitesse maximum peut être librement sélectionnée grâce au variateur de
vitesse.
Faster speed
Más velocidad
Vitesse rapide
Slower speed
Menos velocidad
Vitesse lente
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki TL-2000Qi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki TL-2000Qi in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info