614762
16
Zoom out
Zoom in
Previous page
1/70
Next page
15
Inserting the needles
Needles can be inserted quickly and easily with the practical needle inserter (A).
Switch the machine off ( Power switch to “O”)
Disconnect machine from electricity supply.
Turn handwheel towards you until needles are fully raised. Match the matching up
marks on handwheel and side cover.
Lower the presser foot.
Using the small screwdriver, loosen the needle setscrews and remove the needles
(B).
Place the right-hand needle, flat side towards the back, into the hole of the needle
inserter and insert the needle as far as possible into the needle clamp. Tighten the
setscrew lightly and then insert the left-hand needle in the same way and tighten
both setscrews (C).
Nadeln einsetzen
Mit der Nadelführung im Griff des Pinsels können die Nadeln einfach und schnell
eingesetzt werden (A).
Maschine ausschalten, Hauptschalter auf „O“ stellen.
Das Handrad vorwärts drehen um Nadeln in die höchste Stellung zu bringen.
Markierungspfeile an Handrad und Seitenabdeckung nebeneinander.
Nähfuss senken.
Mit dem kleinen Schraubenzieher die Nadelbefestigungsschrauben lösen. Nadeln
entfernen (B).
Je nach Stichwahl, rechte oder linke Nadel einsetzen.
Die Nadeln mit flacher Seite nach hinten in die hrung am Griff des Pinsels einsetzen
und die Nadeln in den Nadelhalter einführen, bis sie oben anstehen. Die
Nadelbefestigungsschrauben anziehen (C).
Mettre les aiguilles en place
Le guide d’aiguille situé dans le manchon du pinceau permet la mise en place facile
et rapide des aiguilles (A).
Couper le circuit de la machine en mettant le commutateur principal sur „O“.
Tourner le volant en avant et amener les aiguilles à leur position la plus élevée.
Placer, côte à côte, les flèches de repère du volant et du capot latéral.
Abaisser le pied-de-biche.
Desserrer la vis de fixation de l’aiguille avec le petit tournevis. Enlever les aiguilles
(B). Selon le point choisi, introduire l’aiguille à droite ou à gauche.
Placer les aiguilles avec le côté plat à l’arrière dans le guide situé sur le manchon du
pinceau, puis introduire les aiguilles dans le porte-aiguille jusqu’à ce qu’elles butent
en haut. Resserrer les vis de fixation des aiguilles (C).
Using the machine
Używanie maszyny
Inbetriebnahme / Einfädeln
Mise en service / enfilage
Wkładanie igieł
Igły mogą łatwo zostać włożone przy pomocy wsuwarki igieł (A)
Wyłącz maszynę (pozycja wyłącznika "O") i odłącz ja od źródła zasilania.
Obróć pokrętło w swoja stronę aż do całkowitego uniesienia igieł.
Dopasuj do siebie odpowiednie znaki na pokrętle i pokrywie bocznej.
Obniż stopkę.
Używając małego śrubokrętu poluzuj śruby igieł i usuń igły (B).
Umieśc prawą igłę płaska strona do tyłu w otworze wsuwarki igieł i wsuń igłę
najdalej jak można do zacisku. Lekko przyciaśnij śrubę igły, wsuń lewą igłę w taki
sam sposób i dokręć obie śruby (C).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-735 in the language / languages: German, Polish as an attachment in your email.

The manual is 19,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki MO-735

Juki MO-735 User Manual - English, French, Italian, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info