614766
35
Zoom out
Zoom in
Previous page
1/42
Next page
27
Thread breakage during sewing
1. Turn the workpiece at a right angle direction and stop sewing immediately.
The remove the workpiece.
2. Rethread
* If the lower looper thread is broken, cut the both needle threads off at the needle.
Then remove the threads. Thread the lower looper and then the needles.
* If the upper looper thread is broken, remove the looper to lowest position.
Then thread the looper thread.
Bring the thread through under the presser foot and pull about 10 cm of the
thread out behind the presser foot.
3. Raise the presser foot, and place the workpiece under the presser foot.
Sew about 2 to 3 cm over the seam which has already been sewn before the
thread breakage.
Le fil cassé en cours de travail
1. Tourner immédiatement le tissu à angle droit et arrêter tout de suite la couture.
Retirer l’ouvrage.
2. Réenfiler
* En cas de cassure du fil de boucleur inférieur, couper les fils des aiguilles à droit
et à gauche. Retirer alors les fils.
Enfiler le boucleur inférieur et alors les aiguilles.
3. Relever le pied presseur, et passer l’ouvrage dessous. Piquer 2 ou 3 cm en
amont du point où a cassé le fil.
2-3 cm
Thread breakage during sewing / Draadbreuk tijdens het naaien
Fil cas en cours de travail / Fadenriss beim Nähen
Draadbreuk tijdens het naaien
1. Naai direct in een hoek van de stofkant af en verwijder uw werkstuk.
2. Rijg de machine opnieuw in.
Als de ondergrijper draad is gebroken, knip dan de draden af bij de naalden en
verwijder de overblijfselen van onder af. Rijg eerst de grijper in en dan de naalden.
3. Begin opnieuw te naaien op circa 2-3 cm voor de plek waar de draadbreuk ontstond.
Fadenriss beim Nähen
1. Das hgut im rechten Winkel drehen und das Nähen sofort
abbrechen. Anschliessend das Nähgut entfernen.
2. Neu einfädeln.
* Wenn der untere Greiferfaden gerissen oder abgerutscht ist, den
rechten und linken Nadelfaden an der Nadel abschneiden. Dann die
Fäden entfernen. Den unteren Greifer und dann die Nadeln einfädeln.
3. Den hfuss hochstellen und das Nähgut unterlegen.
Etwa 2 bis 3 cm über die Fadenrissstellen nähen.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-644D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-644D in the language / languages: German, Dutch as an attachment in your email.

The manual is 7,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki MO-644D

Juki MO-644D User Manual - English, French, Italian, Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info