614564
36
Zoom out
Zoom in
Previous page
1/40
Next page
35
Problem Cause Solution Page
The machine
does not sew:
Looper or cloth plate cover is open.
The main switch is not on.
The machine is not plugged in.
Close the looper or the cloth plate
cover.
Switch machine on. (Main switch to “I”)
Insert plug into main socket.
9
9
7
Fabric does
not feed
evenly
Differential feed is wrongly adjusted.
Presser foot pressure is too low.
Check the differential feed setting.
Adjust the presser foot pressure.
14
15
Thread
breaks
Thread tension is too tight for the
thread being used.
The machine is not threaded correctly.
Needles are incorrectly inserted.
Wrong needles.
Reduce thread tension.
Check the threading.
Insert needles fully into needle clamp
with at side to the back.
Use needle system 130/705H or JLx2.
23
17
11
11
Needles
break
• Needles are bent or blunt, points are
damaged.
Needles are not inserted correctly.
Fabric was pulled while sewing.
Replace needles.
Insert needles fully into needle clamp
with at side to the back.
Guide fabric gently with both hands.
12
11
--
Skipped
stitches
Needles are bent or blunt.
Wrong needles used.
Presser foot pressure is too low.
Replace the needles.
Use needle system 130/705H or JLx2.
Increase presser foot pressure.
11
11
15
Poor stitch
formation
Threads are not correctly between the
tension dials.
Thread has got caught.
Machine is incorrectly threaded.
• Check if thread is lying between ten-
sion discs.
Raise the presser foot and pull the
thread.
Check threading path of each thread.
Check threading path of each thread.
16
16
17
17
Seams ute
or wave, es-
pecially when
sewing knits
Fabric was pulled while sewing.
Presser foot pressure is too tight.
Differential feed is set incorrectly.
Guide fabric gently.
Reduce presser foot pressure.
Adjust differential feed to N - 2.
--
15
14
Seams puck-
er
Needle thread tension is too tight.
Differential feed is set incorrectly.
Reduce the needle thread tension.
Adjust differential feed to 0.7 - N.
23
14
Fabric edges
curl
Too much fabric is in the stitch.
Thread tension is too tight.
Stitch selection lever is on roll hem.
Reduce cutting width.
Reduce thread tension.
Set selection lever to overlock.
13
23
15
Trouble shooting guide
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-2000QVP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-2000QVP in the language / languages: English as an attachment in your email.

The manual is 16,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info