614564
11
Zoom out
Zoom in
Previous page
1/40
Next page
10
Two step presser foot lifter with integrated front
foot lift
To raise the presser foot, lift the presser foot lever on the rear
of the machine, until it engages (A). It can be raised again to
the maximum height and held in this position to provide more
space between presser foot and stitch plate (B).
When the foot is raised (A and B), the front of the foot is auto-
matically lifted.
Note:
When the presser foot is raised, all the tensions are released
making it easier to thread the machine.
Changing the presser foot
Switch the machine off (power switch”0”) and deac-
tivate the upper knife.
Raise the presser foot.
Turn handwheel towards you until needles are fully raised.
Match the matching up marks on handwheel and side cov-
er.
Press the catch (C) to release the presser foot from the
clamp. Raise the presser foot shank to the highest position (B)
and remove the presser foot to the left. To attach the presser
foot, place it under the shaft. The groove in the shaft should
line up exactly with the presser foot pin (D). Lower the press-
er foot lifting lever and check that the groove in the shank
should line up exactly with the presser foot pin (D). If it is not
lined up, press the catch (C) to line up.
B
A
D
C
Using the machine
To carry out sewing without cutting the material
(the upper knife is deactivated)
Turn off the power switch before deactivating the
upper knife.
1. Lower the upper knife changeover knob in the direction of
the arrow.
2. Check to be sure that the knife is lowered.
Caution:
To activate the upper knife, bring the upper knife changeover
knob at position E. Turn the handwheel by two revolutions by
hand.
E
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-2000QVP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-2000QVP in the language / languages: English as an attachment in your email.

The manual is 16,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info