Manual Juki MO-114D (page 15 of 32) (English)

614760

Zoom out

Zoom in

1/32

Threading

2. Lower looper thread, red markings

Place the spool on the spool holder pin as illustrated.

(1) Bring the thread up from the spool and lay it from

back to front into the guide (right one).

(2) Take the thread with both hands and lay it in the

groove Press the thread down into the 1st guide on

the machine until it clicks into place.

(3) Slip the thread through the groove.

(4,5,6,7) Thread the guides.

(8) Turn the handwheel to bring the looper to its left most

position. Make a thread loop with your right hand. Use

the looper threader to catch the thread loop from the

left and insert the loop from back to front into the slit

on the lower looper. Pull and hold the thread to the

right. Turn the handwheel to bring the looper to the

right side.

(9) Thread the lower looper eye.

(10) Place the thread under the presser foot.

Note:

If the lower looper has to be re-threaded, cut both needle

threads off at the needle and remove surplus thread from

below. Thread the lower looper and then re-thread the

needles.

MO-104D

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-114D in the language / languages: English as an attachment in your email.

The manual is 11,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Juki MO-114D Manual

Product: