614761
12
Zoom out
Zoom in
Previous page
1/32
Next page
Inserting needles
Needles can be inserted quickly and easily with the practical cleaning
brush and needle inserter (A).
• Switch the machine off (Power switch to “0”).
Disconnect machine from electricity supply.Turn the handwheel to-
wards you until needles are fully raised.
Lower the presser foot.
Using the small screwdriver, loosen the needle setscrews and remove
the needles (B). Place the right hand needle, flat side towards the
back, into the hole of the needle inserter and insert the needle as far
as possible into the needle clamp. Tighten the setscrew lightly and then
insert the lefthand needle in the same way and tighten both setscrews
(C).
Using the machine
Needle and machine
Your overlock machine is equipped with needle system 130/705 H
(household sewing machine needles). These should be purchased
when replacement needles are required. Use needles no. 70 - 90 on
your machine.
11
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-104D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-104D in the language / languages: English as an attachment in your email.

The manual is 11,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info