614775
47
Zoom out
Zoom in
Previous page
1/52
Next page
45
Turn lamp bulb to remove it.
Install a new lamp bulb in
place.
Pour retirer l’ampoule de
lampe, la tourner. Poser une
ampoule de lampe neuve.
Para sacar la bombilla,
gírela. Coloque una nueva.
Replacing lamp (How To Remove Face
Cover)
Comment remplacer l’ampoule
CAMBIO DE LA BOMBILLA (CÓMO
QUITAR LA TAPA FRONTAL)
Loosen setscrew located on
rear face of machine. Slide
cover straight in a lateral di-
rection until it comes off.
Utilisez le tournevis, ôtez la
vis de maintien du capot et
retirezle.
Afloje el tornillo que está en
la parte posterior de la
máquina. Corra la tapa
hasta que salga.
* Power consumption of lamp bulb is 15 W.
* Purchase correct lamp bulb from JUKI distributor in your area
from which you have bought your machine.
* La puissance de l’ampoule est de 15 watts.
* Se procurer l’ampoule de lampe correcte auprès du distributeur
JUKI local chez qui la machine a été achetée.
* El consumo de la bombilla es de 15 W.
* Asegúrese de comprar la bombilla adecuada contactando con
su distribuidor.
Setscrew
Vis
Tornillo
Lamp bulb
Ampoule de lampe
Bombilla
CAUTION:
Be sure to disconnect the plug from the wall outlet be-
fore replacing light bulb.
Contact the dealer in your area for the correct light
bulb replacement.
Light bulb is hot after usage of the machine.
ATTENTION:
1
2
Rear of sewing machine
Dos de la machine à
coudre
Parte trasera de la
máquina
PRECAUCIÓN:
Antes de cambiar la bombilla, asegúrese de
desconectar la máquina de la red eléctrica.
Contacte con su distribuidor para saber que tipo de
bombilla es la adecuada.
Tenga en cuenta, que la bombilla, tras haber estado
en funcionamiento, estará caliente.
Avant de remplacer l’ampoule de lampe, débrancher
la fiche de la prise murale.
Contactez vorte revendeur le plus proche pour un
remplacement adapté.
L’ampoule de lampe est chaude après l’utilisation de
la machine.
Maintenance (cleaning)
Nettoyage de la machine
MANTENIMIENTO (LIMPIEZA)
Remove needle plate.
Remove first needle and
presser foot.
Then, detach needle plate.
Retirez les peluches et la
poussière.
Quite el placa agujas.
Quite primero la aguja y el
prensatelas. A continuación,
quite el placa agujas.
Remove the bobbin case
holder.
Retirez la capsule.
Quite el soporte del
canillero.
Re-install bobbin case
holder.
[A]: Fitting projection of bobbin
case holder with part marked with
arrow, drop holder in place.
Après avoir nettoyé la
machine, remettre la
capsule et la plaque
aiguille.
[A]: Mettre le support de boîte à
canette en place en faisant
correspondre sa saillie avec la
partie marquée par la flèche.
1
3
CAUTION:
Be sure to disconnect the plug from wall out-
let before cleaning and lubricating machine.
ATTENTION:
4
Clean to remove lint and
dust.
Clean the area between feed dog
teeth and slots in needle plate,
using brush or the like.
Nettoyez la partie entre les
griffes et le crochet.
Limpie de polvo y de restos
de suciedad.
Utilizando un cepillo, limpie el
área que hay entre los dientes y
en la ranuras del placa agujas.
[A]
PRECAUCIÓN:
Asegúrese de desconectar la máquina
de la red eléctrica antes de limpiar o
lubricar la máquina.
Assurez vous débrancher la prise du
secteur avant de nettoyer la machine.
2
Vuelva a instalar el soporte del canillero.
[A]: Haga coincidir la punta del soporte del canillero con la parte
marcada con la flecha. Encaje el soporte en su sitio.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZLE-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZLE-70 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info