614775
34
Zoom out
Zoom in
Previous page
1/52
Next page
32
* Application examples
* Exemples d’application
* Ejemplo de aplicaciones
Trousers and skirts
Pantalons et jupes
Pantalones y faldas
Pockets
Poches
Bolsillos
CAUTION: Make sure to turn off the machine
before changing the presser foot.
ATTENTION:
PRECAUCIÓN: Asegúrese de apagar la máquina
antes de cambiar el prensatelas.
Assurez-vous d’éteindre la machine
avant de changer le pied presseur.
Darning stitch / Point de reprise /
Punto para zurcido
1
2
Select the pattern.
Sélectionnez le
programme.
Seleccione el tipo de
costura.
Install buttonhole foot (E).
Pass the needle thread through
under the presser foot, and then
draw the thread to the side of
the presser foot.
Placez le pied boutonnière
(E).
Placez le fil d’aiguille sous le
pied à travers celui-ci, et
dégagez le fil vers le côté du
pied.
Buttonhole foot (E)
Pied boutonnière (E)
Prensatelas de ojales (E)
3
4
Bags
Sacs
Bolsos
To continuously sew bartacks of the same length two or
more times, follow the procedure described below:
Pour coudre des points d’extrémité de longueur identiques
2 fois ou plus, suivez la pracédure décrite ci-dessous:
Para coser continuamente presillas de la misma lonquitud,
dos o màs veces, siga el proceso descrito màs abajo:
Start
Marche
Comienzo
Automatically returns
Retours automatiques
Retosno automatico
Automatically U-turn
Retours automatiques
en U
Retorno automatico-V
Press the reverse stitching
button to stop the machine.
Appuyez sur le bouton de
marche arrière pour arrèter la
machine.
Presione el boton de punto
reversible para parar la máquina.
* To change the sewing length stored in memory, reselect the
pattern number and follow steps 1 through 5.
* Pour modifier la longueur de couture stookée en mémoire,
sélectionnez de nouveau le numéro du motif et parcourez les
étapes de 1 à 5.
* Para combiar la lonqitud del punto almacenada, vuelua a
seleccionar el número de diseño y siqa los pasos 1 a 5.
Set the darning stitch
length.
Push the slide to set the length.
Réglez la longueur du point
de reprise.
Coloque la tonqitud del
punto de zurcido.
Empuje el cusor para colocar la
lonqitud.
Instale el prensatelas de ojales (E).
Pase el hilo de la aguja por debajo del prensatelas y llévelo hacia
un lado.
Lower the buttonholing
lever.
Abaissez le levier
boutnnière.
Baje la palanca de ojàles 9.
Empiece a coser.
5
Bigin sewing.
The machine will stop
automatically when the sewing
of one pattern is complete.
Commencez à coudre.
La machine s’arrête
automatiquement lorsque la
couture d’un motif est terminée.
Emplece a coser.
La máquina parará automáticamente cuando se haya cosido un
diseño completamente.
Sliding part
Partie glissière
Pieza corredera
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZLE-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZLE-70 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info