614738
55
Zoom out
Zoom in
Previous page
1/72
Next page
53
Optional parts / Accessoires optionnels
PIEZAS OPCIONALES / Parti optional
Invisible zipper foot
Pied fermeture invisible
Prensatelas de puntada invisible
Piedino punto invisibile per cerniera lampo
Since a seam does not appear on the right side of fabric, opening
can be finished with fabric edges neatly butted.
A fin qu’aucune couture apparaisse sur le devant du tissu, l’ouverture
doit être finie avec les bords du tissu rentrés à l’intérieur.
Como la costura no aparece en el lado derecho, la apertura puede
acabarse con los extremos del tejido remetidos.
Affinchè qualche punto di cucitura non appaia sul diritto del tessuto
l'apertura può finire con la fine interna del tessuto.
Check the zipper opening size. Install the standard presser
foot (A).
Place two pieces of fabric face to face. Baste the fabric from the edge
of fabric to the opening end. At the opening end, change the stitch
length to [2.0] and sew reverse stitches by 1 cm and sew until the
predetermined position is reached. Neatly open the seam allowance.
Vérifiez la taille de l’ouverture du zip. Installez le pied standard
(A).
Placez les deux morceaux de tissu face à face. Bâtissez depuis le
bord du tissu jusqu’à l’extrémité de l’ouverture. Arrivé à celle-ci, réglez
la longueur du point à (2) et cousez en arrière sur 1 cm et cousez
jusqu’à la position prédéterminée. Ouvrez sur la tolérance de cou-
ture.
Comprobar el tamaño de la cremallera. Instalación del
prensatelas (A).
Coloque dos piezas de tejido encaradas. Hilvane el tejido desde su
extremo hasta su apertura final. En dicha apertura, cambie la longitud
de puntada a 2.0 y cosa con puntadas inversas durante 1 cm. A
continuación, siga cosiendo hasta que alcance la posición que desea.
Respete el margen de apertura de la costura.
Verificare la misura della cerniera aperta. Installare il piedino
(A).
Preparare due parti di tessuto sovrapposto. Imbastire il tessuto dal
bordo sulla parte finale. sulla parte finale, cambiare la lunghezza del
punto (2.0) ed eseguire dei punti di inversione per 1 cm. e poi cucire
sino alla posizione predeterminata.Rispettare il margine di apertura
della cucitura.
Fabric (wrong side)
Tissu (envers)
Tejido (del revés)
Tessuto (lato sotto)
Basting
Bâti
Hilvanar
Imbastitura
Runstitch
Surpiqûre
Pespunte
Cucitura
Reverse stitch (1 cm)
Couture arrière (1cm)
Puntada inversa (1 cm)
Punto inversione (1 cm)
1
2.5 cm
a: Apertura final
b: Tamaño apertura
c: Tamaño cremallera
a: Apertura finale
b: Misura aperto
c: Misura cerniera
a: Opening end
b: Opening size
c: Zipper size
a: Extrémité d’ouverture
b: Taille d’ouverture
c: Taille du zip
a
b
CAUTION: Make sure to turn off the machine
before changing the presser foot.
ATTENTION:
PRECAUCIÓN: Asegúrese de apagar la máquina
antes de cambiar el prensatelas.
Assurez-vous d’éteindre la machine
avant de changer le pied presseur.
ATTENZIONE: Assicurarsi che la macchina sia
spenta, prima di sostituire il piedino.
Pattern to be used
Programme
Tipo de costura a utilizar
Modello da usare
c
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E61 in the language / languages: Italian as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki HZL-E61

Juki HZL-E61 User Manual - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info