614738
15
Zoom out
Zoom in
Previous page
1/52
Next page
Pulling Up The Bobbin Thread
Faire remonter le fil de canette
Subir el hilo de la canilla
Thread the hook.
Fully lower the needle
threader. Then, turn it in the
arrow direction until it will not
go further. Bring the thread
under the hook.
Enfilez le crochet.
Abaissez à fond l’enfileur.
Puis, tournez-le vers la flèche
au maximum possible. Placez
le fil sous le crochet.
Lower the presser foot.
Lower the needle threader.
Raise the needle. Then,
lower the needle threader
and thread (A).
Abaissez le pied presseur.
Abaissez l’enfile-aiguille.
Relevez l’aiguille. Puis,
decendez l’enfileur et le fil
(A).
Raise the needle threader.
Release the lever, and the
needle will be threaded.
Relevez le levier de
l’enfileur.
En relâchant le levier,
l’aiguilles sera enfilée.
Draw out thread.
Draw out thread through
needle eyelet by approxi-
mately 10 cm.
Tirez le fil.
Tirez la boucle du fil depuis
le chas d’aiguille sur 10 cm.
Pase el hilo.
Deje que sobresalga un
cabo de hilo de unos 10 cm
por detrás de la aguja.
Turn the handwheel
toward you.
The needle moves up and
down to draw up the bobbin
thread from the bobbin.
Tournez le volant vers
vous.
L’aiguille remontera avec le
fil inférieur.
Gire hacia usted el
volante de la máquina.
La aguja se moverá arriba
y abajo para subir el hilo de
la canilla.
Lightly hold the needle
thread with fingers.
Tenez légèrement le fil
avec les doigts.
Sostenga ligeramente el
hilo con los dedos.
Pull both the needle and
bobbin threads out by
10 cm.
Pass them under presser
foot toward back of ma-
chine.
Tirez les deux fils sur
10 cm.
Passez-les sous le pied et
vers l’arrière de la machine.
Deje que el hilo de aguja
y el de la canilla
sobresalgan 10 cm.
Páselos por debajo del
prensatelas y llévelos hacia
la parte posterior de la
máquina.
* Check to be sure that the needle is in its highest position.
* Contrôlez que l’aiguille est bien en position la plus haute.
* Asegúrese de que la aguja esté en su punto más alto.
Automatic Needle Threader
Enfilage automatique de l’aiguille
Enhebrado automático del aguja
(A)
1
4
3
2
1
2
3
Hook
Crochet
garfio
13
Enhebrar el garfio.
Baje completamente el enhebrador de la aguja y gírelo en
la dirección de la flecha hasta que haga tope. Pase el hilo
por debajo del garfio.
Baje el prensatelas.
Baje el enhebrador de la aguja.
Suba la aguja. A continuación, baje el enhebrador de la
aguja y enhebre (A).
Levante la palanca del enhebrador.
Afloje la palanca y la aguja se enhebrará.
2003/08/21, 15:06Page 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E61 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki HZL-E61

Juki HZL-E61 User Manual - Italian - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info