614758
85
Zoom out
Zoom in
Previous page
1/120
Next page
83
Type and usage of options
Type of options
Default
setting
If a pattern
is selected
again
If the pow-
er is turned
OFF and
re-turned
ON
1
Changing the seam
width of buttonhole
The seam width of buttonhole is changeable.
Standard
The current
setting will
remain.
The setting
will return
to the
default.
2
Change of needle
position
You can change the stitch base line.
(Depend-
ing on the
pattern)
The setting
will return
to the
default.
The setting
will return
to the
default.
3
Selecting the stop
position of needle
You can select the needle position (needle-up or
needle-down) when the sewing machine stops.
Stop with
the needle
down
The current
setting will
remain.
The current
setting will
remain.
4
Twin needle sewing Select this option when using twin needle.
Single
needle
The current
setting will
remain.
The current
setting will
remain.
5
Foot switch function
You can select the operation to be carried out when
depressing the front section of the foot controller.
You can select the operation from among "reverse
stitch", "lock stitch", "half stitch sewing", "one stitch
sewing", "presser foot lifting/lowering", "thread
trimming" and "no function".
reverse
stitch
The current
setting will
remain.
The current
setting will
remain.
6
Presser foot pivot
function
You can select the setting where the presser foot
goes up with the needle held in the needle-down stop
position when you stop the sewing machine.
ON
The current
setting will
remain.
The current
setting will
remain.
7
Setting the pivot height
You can set the presser foot height in the case of
using the pivot function.
Setting range: 2.0 - 6.0 mm (in increments of 1 mm)
2.0
The current
setting will
remain.
The current
setting will
remain.
8
Setting the oat-
function height
You can set the presser foot height when pressing the
oat function button.
Setting range: 0.0 - 2.5 mm (in increments of 0.1 mm)
0.5
The current
setting will
remain.
The current
setting will
remain.
9
Setting of the presser
foot lifting after thread
trimming
You can select the setting were the presser foot
goes up automatically after the completion of thread
trimming.
ON
The current
setting will
remain.
The current
setting will
remain.
!0
Adjusting the darning
This function is used for adjusting the pattern shape.
Adjustable range: -30 - 30
0
The current
setting will
remain.
The current
setting will
remain.
!1
Adjustable starting
stitch speed
You can select the sewing speed to be employed at
the start of sewing.
Slow
The current
setting will
remain.
The current
setting will
remain.
!2
Adjustable reverse
stitch speed
You can select the reverse stitch speed and lock stitch
speed.
Slow
The current
setting will
remain.
The current
setting will
remain.
!3
Guide
The guide for winding bobbin thread, setting of
bobbin, threading of needle thread, changing presser
foot and needle can be seen on the LCD display.
- - -
!4
Adjusting the touch
panel sensitivity
You can adjust the touch panel sensitivity in ve
steps.
3.0
The current
setting will
remain.
The current
setting will
remain.
!5
Contrast of Liquid
Crystal Display (LCD)
The LCD contrast can be chosen from 11 levels.
6
The current
setting will
remain.
The current
setting will
remain.
!6
Button reception
buzzer volume setting
You can change the volume of buzzer that is produced
when pressing the button on the touch panel.
Loud
The current
setting will
remain.
The current
setting will
remain.
!7
Language setting
You can select language from 8 languages or
pictographs.
(Depend-
ing on
destina-
tion)
The current
setting will
remain.
The current
setting will
remain.
!8
Elongation
The length of the patterns (
DX7
Decorative 2:
No.53 ~ 69,
DX5
Decorative: No.72 ~ 84) can be
adjusted. Adjusting range is from size 1 to size 5.
(Depend-
ing on the
pattern)
The current
setting will
remain.
The setting
will return
to the
default.
!9
Deleting the settings You can reset all settings to their default settings.
- - -
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX5 in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info