614758
68
Zoom out
Zoom in
Previous page
1/120
Next page
66
Attention
Turn OFF the power switch
before replacing the presser
foot.
Patchwork piecing
To sew pieces of cloth together is called piecing in patch-
work.
When piecing, the seam allowance is usually 1/4" (6.4 mm).
1
Cut the fabric with seam allowance.
2
Align the right end of the presser foot and
the edge of the fabric and sew.
The needle will enter 1/4" (6.4 mm) from the edge of
the fabric, so the seam allowance of 1/4" (6.4 mm) can
be sewn.
Pattern No.
Direct 2, 3
Presser foot
Standard presser
foot (A)
* You can change the needle position as you like.
Needle position change: Refer to pages 41 and 85.
The needle position can be
adjusted between 0.0~7.0.
When the needle position is
at ‘5.6’, the needle is 1/4" (6.4
mm) from the right edge of
standard presser foot (A).
1/4” (6.4 mm)
5.6
0.0 7.0
1/4” (6.4 mm)
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX5 in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info