707747
99
Zoom out
Zoom in
Previous page
1/104
Next page
97
Case Cause (Reason) Solution
Refer-
ence
page
The needle threading
lever will not return to
the original position and
the machine can not turn
properly.
(This is in case the hook
of needle threader re-
mains in the needles eye.)
Hand wheel is turned by mistake
while the needle threading lever is
in down position. (in the process of
threading to the needle.)
Turn hand wheel slightly away
from you. (to the opposite side
when sewing).
-
The machine will not start
even when start/stop but-
ton is pressed.
The foot controller is plugged in. Start/stop button can function
when foot controller is removed.
8
Thread breaks.
Stitch is skipped.
The machine is incorrectly threaded.
There is knot or knurl on the thread.
The setting of manual thread tension
is incorrect.
The needle is bent or the tip of nee-
dle is broken.
The needle is installed incorrectly.
Threading of bobbin thread is not
correct.
The bobbin can not turn smoothly
inside the hook holder.
The needle size does not match the
thread.
Thread take-up is not threaded.
Rethread the machine correctly.
Remove knot or knurl from thread.
Adjust thread tension manually
according to fabrics and thread to
be used.
Change needle.
Install needle correctly.
Check the correct way of setting
bobbin thread.
Check the correct way of winding
bobbin thread.
Check the combination of thread
and needle.
Rethread the machine correctly.
22
-
28
26
26
20
-
27
22
Thread tension is not
good.
The needle thread is threaded in
correctly.
The bobbin thread is threaded incor-
rectly.
The direction of spool cap doesn’t
match the spool.
Rethread the machine correctly.
Check the correct way of setting
bobbin thread.
Attach the spool cap in a correct
direction.
22
20
22
Puckering occurs. The stitch length is too large on
light-weight fabrics.
The needle tip is broken.
Make the stitch length smaller
(shorter).
Change needle.
39
26
sign is shown on the
LCD display.
Safety mechanism works when ma-
chine stops due to motor lock.
Or, when the voltage fault has oc-
curred.
The safety mechanism will be
reset in a short while and the ma-
chine will return to normal.
(At this time, the start/stop button
will not light up.)
-
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX3 in the language / languages: English as an attachment in your email.

The manual is 27,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki HZL-DX3

Juki HZL-DX3 User Manual - German - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info