614756
69
Zoom out
Zoom in
Previous page
1/120
Next page
67
Appliqué (1)
The edge of the appliqué fabric is sewn with a compact zig-
zag, so it is suitable for the appliqué of cut fabric.
2
Turn the hand wheel towards you and
start sewing along with the outer side of
the appliqué fabric.
1
Cut the appliqué fabric at the nish
line, put it on the base fabric and x it
temporarily.
It is recommended to use both-sided adhesive interlin-
ing or the similar to x the appliqué fabric on the base
fabric. Use the interlining to the edge of the appliqué
fabric.
*
When sewing steep angles, keep the needle inside
the fabric, raise the presser foot, change sewing
direction and sew slowly.
Pattern
No.
Direct 5
DX7 Only
Decorative 2: 68, 69
Presser
foot
Manual buttonhole presser
foot (I)
Open toe presser foot (O)
DX7 Only
Keep the needle inside the fabric
at the point of arrow and raise the
presser foot.
3
At the end of sewing, press the lock stitch
button to sew lock stitches.
* Usually center needle position is used for appliqué
stitches but right or left needle position can be used.
Changing needle position: Refer to page 85.
*
You can also sew appliqués using the pattern Nos. 68
and 69 for elongation of the decorative patterns 2.
Refer to page 103.
Attention
Turn OFF the power
switch before replac-
ing the presser foot.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX series in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info