614756
32
Zoom out
Zoom in
Previous page
1/120
Next page
30
Changeover of needle holes (straight stitch slide plate)
Patterns which can be used
with the straight stitch
selection
After you have changed the needle hole to the needle hole for
straight stitches, press to display the patterns that can
be used.
Select a pattern with or and press to
conrm the pattern.
How to use the straight
stitch slide plate
Do not turn the handwheel by hand when using the
needle hole for straight stitches. Be aware that the
needle can come in contact with the straight stitch
slide plate if you turn the handwheel by hand.
Attention
2
Normal needle hole
1
Needle hole for straight stitches
2
1
Lever
Straight stitch
slide plate
It is possible to change the needle hole between the needle
hole for straight stitches and the normal needle hole without
changing the throat plate.
In the case of starting sewing from the edge of material, the
material can be smoothly sewn without being pulled into the
needle hole by using the needle hole for straight stitches.
It is possible to change the needle hole to be used only by
changing over the lever position.
Lift the needle and the presser foot.
1
By moving the lever to the left: The
needle hole for straight stitches is
selected.
2
By moving the lever to the right while
slightly pushing it away from you: The
normal needle hole is selected.
1
2
* Change the needle hole from the needle for straight
stitches to the normal needle hole before turning the
power OFF.
DX7
DX5
* When a pattern other than those which can be sewn with
the straight stitch selection is selected, the needle hole
for straight stitches cannot be used.
If a pattern other than the straight stitch selection is se-
lected when the needle hole for straight stitches is select-
ed,
will be displayed on the screen.
1. The screen will be restored to the normal one by re-
turning the lever to the right.
2. The screen will be changed over to the Direct 1 when
is pressed.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX series in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info