614756
16
Zoom out
Zoom in
Previous page
1/120
Next page
14
Presser foot lifting lever
Lifting/lowering of the presser foot
The presser foot is lifted/lowered with the presser foot lifting
lever.
The presser foot can be lifted higher than the ordinary lift
position. This feature is useful when placing a heavy-weight
material on the sewing machine.
Even after the presser foot has been lifted with the presser
foot lifting lever, the presser foot can be lowered with the
presser foot auto lift button.
1
Lowered position …… Presser foot should be lowered
when sewing.
2
Ordinary lift position …… This position is used for fabric
removal and/or changing the
presser foot.
3
Extra lift position …… This position is used to put heavy
materials underneath the presser
foot.
* Be careful that the presser foot and the needle should
not interfere when the needle is in down position and the
presser foot is raised to the extra lift position.
1
2
3
1
2
3
The presser foot of the sewing machine automatically goes up slightly when the sewing
machine stops. (Presser foot pivot function)
When the sewing machine is re-started, the presser foot comes down automatically to
allow the user to start sewing with no additional operation.
When the thread trimming button is pressed, the presser foot automatically goes up af-
ter the completion of thread trimming.
This function can be set to OFF using the option button.
In addition, when the needle stop position is set to "Stop with its needle up", the presser
foot pivot function is automatically set to OFF.
Automatic
presser foot
lifting
Presser foot
auto lift button
The presser foot can be lifted/lowered by pressing the presser foot auto lift
button.
(Refer to page 9)
Presser foot lifting lever
Presser foot
The presser foot auto lift button and the presser foot lifting lever are interoperable.
When the presser foot lifting lever is once lifted to position
3
after the presser foot
has been lifted with the presser foot auto lift button, the presser foot lifting lever can
be used for lifting/lowering the presser foot.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-DX series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-DX series in the language / languages: English as an attachment in your email.

The manual is 42,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info