707751
33
Zoom out
Zoom in
Previous page
1/64
Next page
Changing the needle position
Changing the stitch length
These setting apply only to
patterns 01-05. The pre-set
position is "3.5", center position.
When you press the "–" stitch
width adjustment button, the
needle position will move to the
left. When you press the "+"
stitch width adjustment button,
the needle position will move to
the right.
To shorten the stitch length,
press the "–" stitch length
adjustment button. For a longer
stitch length, press the "+" stitch
length adjustment button.
Generally speaking, the thicker
the fabric, thread and needle,
the longer the stitch should be.
Adjusting the stitch width
Adjusting the stitch length
The maximum zigzag stitch
width for zigzag stitching is
"7.0"; however, the width can be
reduced on any patterns. The
width increases as you press
the "+" stitch width adjustment
button from "0.0-7.0".
The density of zigzag stitches
increase as the setting of stitch
length approaches "0.3".
Neat zigzag stitches are usually
achieved at "1.0-2.5".
Closed up zigzag stitches
(close together) are referred to
as a satin stitch.
Straight stitches and
needle position
0.5 1.0 2.0
3.0
4.5
0.0 2.0 3.5 5.0 7.0
01
02 03 04 05
T
Zigzag stitches
0.0 1.0 3.0 5.0 7.0
0.5 1.0
2.0
3.0 4.5
T
A
06
07
08 08
33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-70 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info