614777
72
Zoom out
Zoom in
Previous page
1/76
Next page
72
GENERAL PROBLEMS
Machine does not sew.
* Foot controller is not connected.
-
See page 12 - 13.
* Power switch is turned off.
-
Turn on the switch.
Machine jams/knocks.
* Thread is caught in shuttle.
-
Clean shuttle
(see page 68 - 69).
* Needle is damaged.
-
Replace needle
(see page 24 - 25).
Fabric does not move.
* Presser foot is not lowered.
-
Lower presser foot.
* Stitch length is set at 0.
-
Set it at 1 to 4.
STITCHING PROBLEMS
Machine skips stitches.
* Needle is not all the way up into needle clamp.
-
See
page 24 - 25.
* Needle is bent or blunt.
-
Replace needle
(see page 24 - 25).
* Machine is not threaded correctly.
-
See page
26 - 27.
* Thread is caught in shuttle.
-
Clean shuttle
(see page 68 - 69).
* Fabric is a certain knit or synthetic.
-
Use stretch
stitch needle (see page 24 - 25).
Stitches are irregular.
* Needle size is not correct for thread and fabric.
-
See page 24 - 25.
* Machine is not threaded correctly.
-
See page
26 - 27.
* Top thread tension is too loose.
-
See page
44 - 45.
* Fabric is being pulled or pushed against machine
feeding action.
-
Guide it gently.
* Bobbin has not been wound evenly.
-
Rewind bobbin.
Needle breaks.
* Fabric is being pulled or pushed against machine
feeding action.
-
Guide it gently.
* Needle size is not correct for thread and fabric.
-
See page 24 - 25.
* Needle is not all the way up into the needle clamp
(See page 24 - 25).
THREAD PROBLEMS
Thread bunches.
* Top and bobbin threads are not drawn back under
presser foot before starting seam.
-
Draw both threads back under presser foot about 4
inches (10 cm) and hold until a few stitches are
formed.
Needle thread breaks.
* Machine is not threaded correctly.
-
See page 26 - 27.
* Top thread tension is too tight.
-
See page 44 - 45.
* Needle is bent. - Replace needle (see page 24 - 25).
* Needle size is not correct for thread and fabric.
-
See page 24 - 25.
Bobbin thread breaks.
* Bobbin case is not threaded correctly.
-
See page
22 - 23.
* Lint accumulates in bobbin case or shuttle.
-
Remove lint (see page 68 - 69)
Fabric puckers.
* Top thread tension is too tight.
-
Adjust thread tension
(see page 44 - 45).
* Stitch length is too long for sheer or soft fabric.
-
Shorten stitch length.
4. CHECK CHART FOR PERFORMANCE PROBLEMS
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-35Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-35Z in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info