614777
44
Zoom out
Zoom in
Previous page
1/76
Next page
44
ADJUSTING TOP THREAD TENSION
STRAIGHT STITCHING
The good looking appearance of your stitching is largely
determined by the balanced tension of both top and
bobbin threads. The tension is well balanced when these
two threads 'lock' in the middle of layers of fabric you are
sewing.
Set the thread tension dial at "5" for ordinary sewing.
If, when you start to sew, you find that the stitching is
irregular, you will need to adjust the thread tension dial.
Make any adjustments with presser foot 'down'.
CHANGING PRESSER FEET
Be sure needle is in the up position. Raise presser foot
lever.
1. Raise presser foot release lever to remove the foot.
2. Place the desired foot on the needle plate aligning
needle holes.
3. Lower the presser foot lever so that the foot holder
snaps on the foot.
Always disconnect the machine from power
supply by removing the plug from the
socket-outlet.
CAUTION
BOBBIN TENSION
The bobbin tension has been correctly set at the factory,
so you do not need to adjust it.
Under side
Reverso
Top side
Cara
Well balanced
Bien equilibrada
1
3
2
Palanca de
desprendimiento prensatelas
Presser foot lever
Palanca pie prensatelas
Presser foot release lever
Puntada superior
demasiado apretada
Top stitch too tight
Puntada superior
demasiado floja
Top stitch too loose
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-35Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-35Z in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info