614777
24
Zoom out
Zoom in
Previous page
1/76
Next page
24
Use the standard needles. The size of your needle should
match the size of the thread and both should match the fabric.
For normal sewing, the same size and type of thread
should be used in the bobbin as on the upper part of the
machine.
Never use a bent or dull needle.
For successful sewing of stretch fabrics use stretch stitch
needles.
NEEDLE, THREAD AND FABRIC CHART
70
or
80
Cotton 60 - 100
Synthetic
Machine embroidery
Cotton
Synthetic
Silk A
Machine embroidery
Medium weight cottons,
medium weight synthetics,
poplin, seersucker,
gingham, velvet, light
weight woolens, linen.
Cotton 60 - 80
Mercerized 50 - 60
Synthetic
Cotton 30 - 60
Mercerized heavy
duty
Stretch
stitch
needle
80
or
90
100
All stretch fabrics.
Sheer cottons, silk
synthetics, fine laces,
batiste, dimity.
Heavy weight cottons,
medium to heavy
weight woollens, denim.
Changing the needle
1. Raise the needle bar to its highest position by turning
the hand wheel toward you.
2. Loosen the needle clamp screw by turning it toward
you.
3. Remove the needle by pulling it downward.
4. Insert the new needle into the needle clamp with the
flat side away from you.
5. Push the needle up as far as it can go.
6. Tighten the needle clamp screw firmly with the screw
driver.
Thread Size Needle Size Fabric
Always disconnect the machine from power
supply by removing the plug from the
socket-outlet.
CAUTION
Checking needle
With a good needle, a uniform clearance will be provided
between needle shank and flat plane of board over length.
Do not use a needle that has a bent or blunt point.
Flat board
Tablero plano
Flat part of needle
Parte plana de la aguja
Shank
Espiga
Pin
Pasador
Flat
side
away
from
you.
Flat side
Lado plano
Needle
Aguja
Lado
plano
hacia
fuera
de Vd.
Clamp screw
Tornillo
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-35Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-35Z in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info