614771
54
Zoom out
Zoom in
Previous page
1/78
Next page
How to sew
buttonholes
2
1
4
3
- Using tailor's chalk, mark the
position of the buttonhole on
the fabric.
- Attach the buttonhole foot and
set the pattern selection dial
to " ".
- Lower the presser foot
aligning the marks on foot with
the marks on the fabric as
shown in fig. (1). (The front
bar tack will be sewn first.)
- Open the button plate and
insert the button. (2)
- Lower the buttonhole lever and
push it back slightly as in fig. (3)
- While gently holding the upper
thread, start the machine.
- Buttonhole stitching is done in
the order shown in fig. (4)
- Stop the machine when the
buttonhole is sewn.
- Mark the position of the
buttonhole on the fabric with
the tailor's chalk, attach the
buttonhole foot, and set the
pattern selection dial to " ".
- Hook the gimp thread onto the
back end of the buttonhole
foot, then bring the two gimp
thread ends to the front of the
foot, insert them into the
grooves and temporarily tie
them there.
- Lower the presser foot and
start sewing.
* Set the stitch width to match
the diameter of the gimp
thread.
- Once sewing is completed,
gently pull the gimp thread to
remove any slack, then trim
off the excess.
Buttonhole-making is a
simple process that provides
reliable results.
Making a Buttonhole
Making a Buttonhole on
Stretch Fabrics (5)
When sewing buttonholes on
stretch fabric, place a gimp
thread under the buttonhole
stitching.
0.4~0.6
3~7
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-353ZR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-353ZR in the language / languages: English as an attachment in your email.

The manual is 29,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info