614561
11
Zoom out
Zoom in
Previous page
1/124
Next page
9
While sewing, speed can be adjusted.
For straight stitch/zigzag stitch: The sewing machine performs
reverse stitch as long as this button is
held pressed.
For other stitch types: The sewing machine performs lock
stitch.
When machine stops, press this button to change
the needle position. (When the needle is up, the
needle moves down and vise versa.)
The sewing machine performs sewing at a low
speed by keeping this button held pressed for a
long time.
* The needle will not move when the presser foot
is in its upper position or no pattern is selected.
After sewing, press this button to trim
both threads automatically.
Function of operational buttons
Notes for thread trimming:
1. Do not use thread thicker than No.30.
2. After trimming, the stitch can be done without pulling up bobbin thread.
3. When sewing again after thread trimming, if you pull up the bobbin thread again and place it under-
neath the presser foot together with needle thread, you can avoid birds nest on the wrong side of the
fabric.
4. Regularly clean the machine (refer to page 118), as dust in the area of the thread trimming unit may
cause malfunction.
When this button is pressed, the sewing machine
performs lock stitch.
When this button is pressed while the sewing ma-
chine is engaged in pattern sewing, the sewing ma-
chine stops after it has completed the sewing of the
one-cycle/one-point of the pattern.
When pressing this button, machine starts to sew slowly and then
up to the speed set by speed controller. Another press of this button
stops the sewing machine.
Color of button indicates machine status.
Green: Ready to start and/or while sewing
Red: Not ready to start
Orange: When the lock stitch button is pressed while the sewing
machine is engaged in pattern sewing (The sewing ma-
chine performs lock stitch after it has completed the sew-
ing of the pattern by one cycle. Then, the sewing machine
stops.)
When this button is pressed while the
sewing machine is at rest, the presser
foot position is changed.
When the presser foot is in its upper po-
sition, it comes down to its lower position
and vice versa.
Presser foot auto lift button
Speed controller
Reverse stitch button
Start/stop button
Thread trimming button
Needle up/down button
Lock stitch button
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DX-2000QVP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DX-2000QVP in the language / languages: English as an attachment in your email.

The manual is 38,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info