614555
21
Zoom out
Zoom in
Previous page
1/51
Next page
– 19 –
III. FOR THE OPERATOR
1) Press power switch to turn the power ON.
Power switch is in the ON state when the "I"
mark side is pressed. It is in the OFF state when
the "○" side is pressed.
If the power indicator LED on the panel
does not light up after having turned ON
the power switch , immediately turn
OFF the power switch and check the
supply voltage. In addition, in such a case
as this, re-turn ON the power switch when
2 to 3 minutes or more have passed after
turning OFF the power switch .
2) When the power switch is turned ON, the
sewing machine automatically turns to bring the
needle bar to its UP position in the case the nee-
dle bar is not in that position.
When turning ON the power, the needle
bar moves. Do not put your hands or
things under the needle.
3) The pedal is operated in the following four steps:
a. The machine runs at low sewing speed when you
lightly depress the front part of the pedal.
b. The machine runs at high sewing speed when
you further depress the front part of the pedal.
(If the automatic reverse feed stitching has been
preset, the machine runs at high speed after it
completes reverse feed stitching.)
1. Operating procedure of the sewing machine
5) When one-touch type reverse feed switch is
pressed, the sewing machine performs reverse
feed stitching.
4) Reverse feed stitching at the beginning of sewing,
reverse feed stitching at the end of sewing and
various sewing patterns can be set on built-in panel
of the machine head.
c. The machine stops (with its needle up or down) when you reset the pedal to its original position.
d. The machine trims threads when you fully depress the back part of the pedal.
* When the auto-lifer (AK device) is used, one more operating switch is provided between the sewing ma-
chine stop switch and thread trimming switch. The presser foot goes up when you lightly depress the back
part of the pedal , and if you further depress the back part , the thread trimmer is actuated.
6) When you have nished sewing, conrm rst that the sewing machine has stopped. Then, press power
switch to turn the power OFF.
In the case the machine is not used for a long time, remove the power plug from the plug recep-
tacle.
1
4
2
0
3
(For CE)
* The mounting location
and shape of the power
switch
differs with the
place of destination.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info