614555
16
Zoom out
Zoom in
Previous page
1/51
Next page
– 14 –
(1) Changing the stroke of thread take-up
spring
1) Loosen setscrew .
2) As you turn tension post clockwise (in direc-
tion A), the stroke of the thread take-up spring
will be increased.
3) As you turn tension post counterclockwise (in
direction B), the stroke will be decreased.
(2) Changing the pressure of thread take-up
spring
1) Loosen setscrew , and remove thread tension
asm. .
2) Loosen setscrew .
3) As you turn tension post clockwise (in direc-
tion A), the pressure will be increased.
4) As you turn the tension post counterclockwise
(in direction B), the pressure will be decreased.
1) When sewing heavy-weight materials, move
thread guide to the left (in direction A) to
increase the length of thread pulled out by the
thread take-up.
2) When sewing light-weight materials, move thread
guide to the right (in direction B) to decrease
the length of thread pulled out by the thread take-
up.
3) Normally, thread guide is positioned in a way
that marker line C is aligned with the center of
the screw.
(1) Adjusting the needle thread tension
1) The length of thread remaining at the needle tip
after thread trimming is shortened by turning ten-
sion regulating nut No. 1 clockwise in direction
A.
2) It is lengthened by turning the nut counterclock-
wise in direction B.
3) The needle thread tension is increased by turning
tension regulating nut No. 2 clockwise in direc-
tion C.
4) It is decreased by turning the nut counterclock-
wise in direction D.
(2) Adjusting the bobbin thread tension
1) The bobbin thread tension is increased by turning
tension regulating screw clockwise in direction
E.
2) It is decreased by turning the screw counterclock-
wise in direction F.
19. Thread tension
20. Thread take-up spring
21. Adjusting the thread take-up stroke
WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
B
A
C
B
A
A
B
C
D
E
F
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info