30210
73
Zoom out
Zoom in
Previous page
1/142
Next page
HELI 72
Aux 2 (Channel #7) Input Selection
The Aux 2 Channel Input Selection Function allows you to select
which switch, pitch trim knob, or throttle hold switch will activate
the Aux 2 Function. If you are using the Aux 2 Function (channel
#7) for remote gyro sensitivity, JR TEC-1000 carburetor
operation, etc., this function should remain in the factory INH
position.
When using the Aux 2 Function for the gyro sensitivity, you can
change the rudder dual rate and the gyro sensitivity at the same
time. Conversely, if the throttle hold switch is selected, the gyro
sensitivity is changed only when the throttle hold is activated.
Press the UP and DN keys simultaneously and turn the power
switch ON to access the system Set-Up Mode. Using the UP
and DN keys, select Input Select Function and press the UP and
DN keys simultaneously to access.
3.11 Input Selection Function (System Set-Up Mode)
Aux 2 channel switch
assignment
Choices:
INH: Inhibit
Hold SW: Hold Switch
Pit. Trim: Pitch Trim
Knob
Gear Channel Switch Input
ACT: Active
INH: Inhibit
To Model Select
function
To Data Transfer
fucntion
Press either the
+ or - key to
select the switch
assignment or to
activate/inhibit
the Gear Switch
function
Press to change Aux 2
from INH to Hold Switch,
or to change gear from
INH to active
DN
SELECT
CH CH CLEARUP
Press either key
to move the arrow
from Aux 2 to
Gear
Press the UP and DN keys
simultaneously to enter/exit the
System Set-Up Mode
Press the DN and Select keys
simultaneously to access the
System Mode info display
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XP8103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XP8103 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info