HELI 65
From Normal Display, press the UP and DN keys simultaneously
to enter the Function Mode. In this mode, by using the UP or DN
keys, the desired functions can be selected. When channel
selection or an additional function change is desired, use the
CH keys or Select key. For example, Dual Rate Function is
selected and the elevator channel is displayed by pressing the
UP key once; the function is changed to the next mode, Reverse
Switch, but the channel is still displayed as elevator.
Function Mode Flowchart
Information pertaining to each function is explained on the page
number listed next to the function name. Functions will appear
on the screen in the same order they are shown on the flow
chart below:
Therefore, by scrolling through the program, you can adjust
each function related to the elevator channel quickly and easily.
To Access The Function Mode
1. Switch the power switch to the ON (upper) position.
2. Press the UP and DN keys simultaneously.
3. Use either the UP or DN keys to scroll through the menu and
access the appropriate function.
3.2 Function Mode
Use either the UP
or DN key to scroll
through the menu
and access the
applicable function
Pg. 73 Dual Rate Exponential
Pg. 75 Reverse Switch
Pg. 75 Sub-Trim Adjustment
Pg. 76 Servo Travel Adjust (End Point Adjustment)
Pg. 76 Stunt Trim
Pg. 77 Throttle Hold
Pg. 78 Throttle Curve
Pg. 81 Pitch Curve
Pg. 83 Inverted Flight
Pg. 84 Revolution/Acceleration Mixing
Pg. 85 Gyro Sensitivity Adjustment
Pg. 87 Programmable Mixing 1
Pg. 87 Programmable Mixing 2
Pg. 87 Programmable Mixing 3
Pg. 91 Fail-Safe/Hold (PCM Only)
Pg. 94 Trainer
Pg. 95 Timer Setting
Pg. 97 Servo Output Indicator
