30210
27
Zoom out
Zoom in
Previous page
1/142
Next page
ACRO 26
2.2 Normal Display, cont.
DN
SELECT
CH CH CLEARUP
Press simultaneously
to access the List
Mode/System Set-Up Mode
Press Select and
either the + or - keys
simultaneously to
adjust the contrast of
the LCD display
Press the Clear key
to reset to factory
settings
Press the UP and DN keys
simultaneously to change
to Function Mode (with
power switch ON)
When timer function is
active, use CH key to
start/stop timer
Press the UP and DN keys
simultaneously and switch the
power from OFF to ON to
change the system to the
System Set-Up Mode
To set the System Set-Up Mode, press the UP and DN keys
simultaneously and turn the power switch from OFF to ON.
Functions are selectable by pressing either the DN or UP keys.
Individual settings are explained later at each function. In this
mode, servos are not activated, but operating signals are
transmitting (only when the Tx module is in place). However, use
extra caution not to interfere with other frequencies. By pressing
the DN and UP keys simultaneously, you can return to the normal
display, which allows the servos to again operate.
3.1 System Set-Up Mode
[INFO-DISP]
From the Normal Display, the following inputs can be made:
When setting various functions with the buttons shown below,
start either in the Function Mode or the System Set-Up Mode.
3. System Set-Up Mode Functions
Pg. 28 Information Display
Pg. 29 Model Select and Copy
Pg. 29 Model Name Input
Pg. 30 Model Type Selection Function
Pg. 30 Data Reset
Pg. 31 Modulation Selection
Pg. 32 Data Transfer between traqnsmitters
Pg. 34 Wing Type Selection
Pg. 35 Spoiler Channel Input Selection
SYSTEM SET-UP MODE
Use either the UP
or DN key to scroll
through the menu
and access the
applicable function
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XP8103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XP8103 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info