Manual JRpropo XP8103 (page 4 of 142) (English)

30210

Zoom out

Zoom in

1/142

Airplane Mode Helicopter Mode Glider Mode

1-2-3 Programming

System Set-Up Mode

Function Mode

ENT

UP – MODE – DN

Push these two buttons

simultaneously and

hold.

Turn the power switch

ON (up).

ENT

UP – MODE – DN

Push these two buttons

simultaneously.

Turn the power switch

ON (up).

ENT

UP – MODE – DN

Scroll through options

using one of these

buttons.

ENT

UP – MODE – DN

Scroll through the

functions using one of

these buttons.

[INFO-DISP]

↕

Pg. 28 Information Display

Pg. 29 Model Select and Copy

Pg. 29 Model Name Input

Pg. 30 Model Type Selection Function

Pg. 30 Data Reset

Pg. 31 Modulation Selection

Pg. 32 Data Transfer between traqnsmitters

Pg. 34 Wing Type Selection

Pg. 35 Spoiler Channel Input Selection

Pg. 36 Dual Rate Exponential

Pg. 38 Reverse Switch

Pg. 38 Sub-Trim

Pg. 39 Travel Adjust (end point adjustment)

Pg. 39 Elevator to Flap Mixing

Pg. 40 Aileron to Rudder Mixing

Pg. 41 Landing System

Pg. 42 Snap Roll

Pg. 44 Differential Aileron Mixing (only if ﬂaperon or

elevons mixing is active)

Pg. 45 Trim Offset Memory

Pg. 46 Flap Knob Operating Value Adjustment

Pg. 47 Programmable Mixing 1

Pg. 47 Programmable Mixing 2

Pg. 47 Programmable Mixing 3

Pg. 47 Programmable Mixing 4

Pg. 47 Programmable Mixing 5

Pg. 47 Programmable Mixing 6

Pg. 50 Fail-Safe/Hold (PCM Only)

Pg. 52 Trainer

Pg. 54 Timer

Pg. 55 Servo Output Values

Pg. 106 Information Display

Pg. 106 Model Select And Copy Function

Pg. 107 Model Name Input

Pg. 108 Model Type Selection Function

Pg. 108 Data Reset

Pg. 109 Modulation Selection

Pg. 110 Model Data Transfer

Pg. 112 Wing Type Selection

Pg.112 Flap Channel Input Selection

[INFO-DISP]

↕

Pg. 113 Dual Rate/Exponential

Pg. 114 Reverse Switch

Pg. 114 Sub-Trim

Pg. 115 Travel Adjustment

Pg. 115 Elevator To Flap Mixing

Pg. 116 Aileron To Flap Mixing

Pg. 117 Differential

Pg. 118 Flap To Elevator Mixing

Pg. 119 Flap To Aileron Mixing

Pg. 120 Aileron To Rudder Mixing

Pg. 121 Butterﬂy Mixing (Crow)

Pg. 122 Dual Flap Trim

Pg. 123 Trim Offset

Pg. 125 Programmable Mixing

Pg. 127 Fail-Safe (PCM Only)

Pg. 130 Trainer

Pg. 131 Timer Setting

Pg. 133 Servo Output Monitoring

(Only available when Dual Flap

setting is active)

[INFO-DISP]

Pg. 66 Information Display

Pg. 66 Model Selection and Copy Function

Pg. 67 Model Name Input

Pg. 68 Model Type Selection

Pg. 68 Data Reset

Pg. 69 Modulation Selection

Pg. 70 Data Transfer

Pg. 72 Aux 2, channels can be used for gyro

sensitivity adjustment

Pg. 73 Dual Rate Exponential

Pg. 75 Reverse Switch

Pg. 75 Sub-Trim Adjustment

Pg. 76 Servo Travel Adjust (End Point Adjustment)

Pg. 76 Stunt Trim

Pg. 77 Throttle Hold

Pg. 78 Throttle Curve

Pg. 81 Pitch Curve

Pg. 83 Inverted Flight

Pg. 84 Revolution/Acceleration Mixing

Pg. 85 Gyro Sensitivity Adjustment

Pg. 87 Programmable Mixing 1

Pg. 87 Programmable Mixing 2

Pg. 87 Programmable Mixing 3

Pg. 91 Fail-Safe/Hold (PCM Only)

Pg. 94 Trainer

Pg. 95 Timer Setting

Pg. 97 Servo Output Indicator

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XP8103 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JRpropo XP8103 Manual

Product: