606954
95
Zoom out
Zoom in
Previous page
1/112
Next page
93
Method of setting and explanation of the each items on X-BUS MODE A.
ID : There are two ID exist on this application one is Main ID and second is the Sub ID. Main ID congures
channel numbers. Sub ID congures upto maximum of 4 servos, data which can be adjusted individually.
ID Change ( ID CHANGE)
It is capable to adjust the X-BUS devices through Transmitter. Input both the own ID from X-BUS device
and the desired ID channel to be changed. Place the Cursor on “SET” and press the dial to nalize the
setting.
ID Reset (ID RESET)
It is capable to reset the X-BUS devices as initial setting through Transmitter. Set the Cursor on the “ID
CHANGE” press the dial to nalize. “ID CHANGE” shall highlighted text reversed to be changed. Place the
Cursor on “SET” and press the dial to nalize the ID RESET.
Reverse (REVERSE)
It is capable to set the servo as reverse movement. Set the particular servo’s Channel ID and Sub ID,
Set either Normal or Reverse Press the dial. Place the Cursor on SETand press the dial to nalize for
connected device for accomplishment.
Neutral (NEUTRAL)
It is capable to set the servo neutral. Set the particular servos Channel ID and Sub ID, Set the cursor on “+
or to change the neutral value, Place the Cursor on “SET” and press the dial to nalize for connected
device for accomplishment.
Travel(TR AVEL)
It is capable to set the servo travel. Set the particular servo’s Channel ID and Sub ID, Set the cursor on “+
or to change the travel value, Place the Cursor on SETand press the dial to nalize for connected
device for accomplishment.
These setting must be accomplish with Transmitter and Receiver being baind (Paired) together and X-BUS
devices must be appropriately connected with both power turned on.
Note:Be sure to Take o󰮏 the Bind plug from the receiver bind port, other wise setting cannot be accomplished.
Caution▋Items
Actually operate the servos and carefully conrm the setting before ying.
Main ID on Left and Sub ID on
Right for compliant Device
which need to change ID.
Main ID on Left and Sub ID on
Right for compliant Device.
Set the Cursor on the specific
item and Press the scroll dial
to finalize.
This is the value of the SETTING amount that
determines how precisely the servo moves for one
increment of increase-decrease. (similar to trim
step) It can be set between 1% - 10% with 1%
offering fine control and 10% coarse adjustment.
Press either “+” or “- to increase
or decrease the numerical value
on setting value in the center.
System▋List
XG14English.indd 93 2013/07/16 16:41
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info