606954
91
Zoom out
Zoom in
Previous page
1/112
Next page
89
Fail▋safe【FAIL▋SAFE
Function▋Explanation
If the receiver does not receive a valid RF signal from the transmitter, this function moves the
servos to predened positions, to avoid the scenario of the aircraft crashing at, for example,
full throttle. Be sure to set the Fail Safe before ying each aircraft.
Setting▋Method
This function allows selections to be made for each channel in case of loss of RF signal. “HOLD”,
maintains the servo positions as they were immediately before the radio signal was lost. This is
the default setting. It is also possible to select “FAIL SAFE”. In order to set the “FAIL SAFE”
positions (the servos move to predened positions in the event of loss of radio signal), change
the switch for each of the channels on the screen to “FAIL SAFE”. The memorising of each of the
Fail Safe positions is carried out by moving the stick to the desired position and holding it
there while pressing the “MEMO ” key to activate this function.
Caution▋Note
For safety reasons, engine-powered and electric powered aircraft must have their motive power channels set
to the slowest speed.
If the Reverse Switches or Stick Mode are changed after setting the Fail Safe, the motive power may be set
to the Full Throttle position. In order to avoid making this dangerous mistake, be certain to remember to
implement the Fail Safe settings after completing the aircraft set-up.
Before ying, be certain to conrm the failsafe settings by switching o󰮏 the transmitter power, and observing
that the servos move to the positions intended.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
System▋List
The screen switches are set to Fail Safe
when the switch is on the upper side,
and set to the Hold mode when the
switch is on the lower side.
The screen switches are set to Fail Safe
when the switch is on the upper side,
and set to the Hold mode when the
switch is on the lower side.
Channel Name
Channel Name
Each Channel Fail Safe
Position Display
Each Channel Fail Safe
Position Display
The current position is memorized using the CLR key.
The current position is memorized using the CLR key.
XG14English.indd 89 2013/07/16 16:41
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info