606954
87
Zoom out
Zoom in
Previous page
1/112
Next page
85
Speed / Launch Switch (SPEED/LAUNCH)
By setting up both a SPEED(Speed Switch)and LAUNCH(Launch Switch)it is possible to set ight Modes.
① SPEED (Speed Switch) By setting a Speed switch, it is possible to use this ight mode.
Speed Mode (SPEED)
Cruise Mode (CRUISE)
Thermal Mode (THERMAL)
LAUNCH (Launch Switch) By setting the Launch switch, it is possible to use the following ight modes.
Landing Mode (LAND) Note: Landing Mode cannot be used when 2position switch has been selected.
Launch (LAUNCH)
Distance Mode (DISTANCE) Note: Only when Customized ight mode switch being used
Zoom Mode (ZOOM) Note: Only when Customized ight mode switch being used
Free Mode(FREE) Note: Only when Customized ight mode switch being used
Launch Switch Reverse (LAUNCH REV)
It is possible to switch the Launch Switch position on the Flight
Mode switch.
NORM : The Upper switch position(POS 0)will be set as
LAND(Landing Mode), and the Bottom switch position
(POS 2), will be set as LAUNCH(Launch Mode).
REV. : The reverses the positions for LAUNCH and LAND POS
0 becomes LAUNCH (Launch Mode) and POS 2 becomes
LAND (Land Mode).
② When adding "SPEED/LAUNCH" as a custom ight mode
It is possible to set a custom switch for choosing the Flight Mode
when Speed/Launchis selected. It is also possible to select the
priority for each ight mode. Select the switch position using the
"SW SEL" function then choose the priority for each ight mode.
Device Select (DEVICE)
Here input devices (switches, levers and trim switches) can be linked
to a particular channel. Select the device as desired.
Selection of output (OUT)
Here the Output conguration of each channel can be specied.
INH: No output.
ACT: Allow output - standard.
MOT: Use this channel for Motor control.
The channels which can be allocatable for Motor control are “GEAR”(Gear Channel)and AUX3”(AUX 3 channel)
When the Motor Channel is set, “MOTOR SYSTEM” on the function List becomes activated.
ダイヤ
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意:
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
Even though a channels OUT (Output) can be set to “INH, it is possible to use the channel with a “PROGRAM
MIX” (on the function List) as a Master channel. It is also possible to set this under “DEVICE SELECT
Touch Select function: When selecting a switch, by operating the switch that you wish to use, the switch will be
automatically recognised and be set to that function. It is useful when you are not sure of the switch name.
It is possible to select from the following three (3) movement options when using a trim lever as an Input
device.
2P: 2position movement
3P: 3position movement
MO: Momentary Movement
Caution▋Note
Actually operate the servos and carefully conrm the settings before ying.
Device Select Selection of outputSelection of output
Flight mode Extension Switch
Selection of Extension Switch
Device Select Selection of output
Selection of outputFlight mode Extension Switch
Device Select Selection of output
Selection of output Flight mode Extension Switch
Launch Reverse Switch
System▋List
XG14English.indd 85 2013/07/16 16:41
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info