606954
49
Zoom out
Zoom in
Previous page
1/112
Next page
47
BalanceBALANCE
Function▋Explanation
The “BALANCE” functions is used to correct for individual servo characteristic to equalize the
travel of each control. This is useful when using Six Ailerons, Four Ailerons, Dual Elevators, and
Dual Flaps. It is useful when more than two servos are used per control surface.
Setting▋Method
The initial Balance setting points are three points set to the slow, center and high sides. To add
a point, set the stick to the desired position and press the ADD” key. In the situation where the point is set
to be deleted, this should be carried out using the “DELkey. For the adjustment, Set the point by stick and
change the value by scrolling the dial for “IN” or “OUT”.
For▋Airplane
Setting can be achieved for the below Wing types.
Flaperon (FLAPERON), Dual Aileron (DUAL AILE)
It is possible to correct the right Aileron’s servo movement, based on the left Aileron’s servo movement.
Tail-less Wing (DELTA)
It is possible to correct the right Aileron’s servo movement based on left Aileron’s servo movement.
※ The actual meaning of “DELTAis a dened wing shape, and not a tailless airplane. However, JR does call tailless
airplanes deltas (eg the F-102 or Dassault Mirage III).
Four Aileron airplane (4-AILE)
It is possible to correct the outside two Aileron’s servo movement and inside two Aileron servos based on the
left outside Aileron servos and inside Aileron servo movement.
Six Aileron airplane (6-AILE)
It is possible to correct the Outside Left aileron (LAL3) as a base, Middle Left aileron (LAL2),Inside Left
aileron(LAL1), Outside Right aileron(RAL3), Middle Right aileron (RAL2)and Inside right aileron(RAL1) servos.
V-tail (V TAIL)
It is possible to correct the right V-tail ’s servo movement based on the left V-tail’s servo movement.
Dual Elevator (DUAL ELEV)
It is possible to correct the right elevator’s servo movement based on the left elevator’s servo movement.
Four Elevator (4-ELEV)
It is possible to correct the Outside Left Elevator(LEL2) as a base, Inside Left Elevator(LEL1),Outside Right
Elevator(REL2) and Inside Right Elevator(REL1)servos.
Dual Rudder (DUAL RUDD)
It is possible to correct the right rudder’s servo movement based on the left rudder’s servo movement.
Dual Flap (DUAL FLAP)
It is possible to correct the right ap’s servo movement based on the left aps servo movement.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
Function▋List
XG14English.indd 47 2013/07/16 16:40
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info