606954
41
Zoom out
Zoom in
Previous page
1/112
Next page
39
FLAP▋SYSTEM【FLAP▋SYSTEM
Function▋Explanation
The flaps can be controlled in three stages using a switch. A flap delay is also possible.
Additionally, there is a function that carries out mixing to the elevators. There is also an Auto Throttle function
that automatically lowers the aps when the throttle stick is lowered.
Setting▋Method
If the ap channel output has not been set to “SYS” in the Device Select menu, the function will be displayed as
being unusable.
It is also possible to control the aps with a switch set by the input device for the ap channel using Device
Select. Input the ap position value and if necessary arrange the delay value depending on the NORM, MID
and LAND switch position.
Auto Throttle Function (AUTO THRO)
By activating AUTO THRO” it enables control of the aps automatically depending on throttle stick position.
Set the stick at the desired position and press the dial to display the box to set the position.
Above the point where “AUTO THRO” has been set, “NORM” mode is selected. Below this point the aps should
be activated to the desired position automatically.
Flight mode coupled function (F.MODE)
It is possible to set the ap position related to the selected ight mode.
In order to o󰮏-set the pitching action upon activating the aps, it is possible to set a mix to elevator. And it is
also possible to set a correction in roll by mixing to the Ailerons when the aps are deployed. Additionally,
Aileroncanbefunctionasaps,deetingbothdownwards,orbothupwards.(Crowbraking)
Trim Input Function (TRIM IN)
By using the Trim Input, it is possible to change the ap amount values using a Trim Lever. Therefore, it is
possible to easily adjust the ap trim during ight.
Caution▋Note
Actually operate the servos and carefully conrm the settings before ying.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
Function▋List
Trim Input Function
(TRIM IN)
Correction mixing to the Elevator and AileronServo Position in Each Flap Position
Flight Mode Coupled Function
(F.MODE)
Auto Throttle Function
(AUTO THRO)
Movement Delay
Time setting
Movement Delay
Time setting
XG14English.indd 39 2013/07/16 16:40
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info