606954
38
Zoom out
Zoom in
Previous page
1/112
Next page
36
Throttle▋trim【THRO▋TRIM
Function▋Explanation
This function sets the Throttle Trim movement, and additionally a Throttle Cut function is
provided for cutting the engine. There is a Trim Memory function for cutting the engine using
the Trim. Note that for airplanes, an Idle Adjust function is also incorporated that allows
separate detailed setting of the idle position.
Setting▋Method
If the Throttle Cut is set to ACT, the Trim Memory will be forcibly set to INH. On the screen rotate the dial to
move to and select (inverse display), then press the dial to set the item.
Throttle Cut Function (THRO CUT)
The Throttle cut can be used by setting it to ACT. Initially the switch is allocated to “TRN SW”, POS1. It is
possible to allocate this switch to any desired switch location. Set the Throttle Cut to the desired position.
Time Lag (TIME LAG)
This function is to avoid the sudden stopping of the engine if the throttle cut switch is activated in error.
This is especially useful when using the momentary switch (Trainer switch). It is possible to use this
momentary switch as timer switch at the same time as throttle cut. When the time lag function is activated,
throttle cut only activates when the switch is held on for a certain duration. The timer can be activated by
a momentary action as usual. The time lag duration can be set between 0.5 to 2 seconds.
Throttle Trim Memory (THRO TRIM MEMORY)
When the Trim is lowered in a single action, the trim position immediately prior to the movement will be
memorized, and when the trim is raised again, the trim will automatically return to the memorized position.
The memorized position will be marked on the Trim display.
Idle Adjust (IDLE ADJUST)
For Airplane Mode only
The idle position when the throttle
stick is at the “Slow” position can be
given a separate setting using a switch.
It is possible to set up landing with idle
“DOWN”, and normal flying with idle
UP”.
Please carefully conrm the linkage does not jam when the carburetor is closed.
Caution▋Note
Throttle Cut will only work when the helicopter Flight Mode is set to “NORMAL.
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
Function▋List
Throttle Cut
Time Lag
Function Operation Condition
Function Operation Condition
In order to use the function,
INH should be changed to ACT
In order to use the function, after setting
the Throttle Cut function to INH, set the
Trim Memory to ACT in this function.
Idling Point Adjustment
Throttle Cut
Time Lag
Function Operation Condition
Function Operation Condition
In order to use the function,
INH should be changed to ACT
In order to use the function, after setting
the Throttle Cut function to INH, set the
Trim Memory to ACT in this function.
Idling Point Adjustment
ダイヤ
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意:
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
XG14English.indd 36 2013/07/16 16:40
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info