41
7.1 EQUIPMENT DISPOSAL
Dispose of this equipment by following the ordinances or regulations of the
local authorities in charge of the disposal site.
7.2 DISPOSAL OF USED BATTERY
SECTION 7
DISPOSAL
DISPOSAL
On this equipment, lithium battery is used for:
BT1 in the CPU control circuit (PC1) (Sanyo electric CR2032-FT6-1.)
● Do not keep used lithium batteries but dispose of them immediately after as
non-combustible waste.
● Before disposing of used lithium battery, insulate by affixing tape to the
positive and negative terminals or by other means. In the area where used
battery are separated from other waste, dispose of them by following the
local regulations.
For detail, consult your local distributor, our sales office or your local gov-
ernment.
7.3 DISPOSAL OF USED MAGNETRON
The scanner unit in this radar use a magnetron (NKE-1044A).
● After replacing it, return the used one to your local distributor or our sales
office.
For detail, ask your local distributor or our sales office.
Before disposing of used lithium battery, insulate by affixing tape
to the positive and negative terminals or by other means. Other-
wise, short-circuiting may occur, resulting in heat generation,
bursting or ignition.
CAUTION
41
7.1 EQUIPMENT DISPOSAL
Dispose of this equipment by following the ordinances or regulations of the
local authorities in charge of the disposal site.
7.2 DISPOSAL OF USED BATTERY
SECTION 7
DISPOSAL
DISPOSAL
On this equipment, lithium battery is used for:
BT1 in the CPU control circuit (PC1) (Sanyo electric CR2032-FT6-1.)
● Do not keep used lithium batteries but dispose of them immediately after as
non-combustible waste.
● Before disposing of used lithium battery, insulate by affixing tape to the
positive and negative terminals or by other means. In the area where used
battery are separated from other waste, dispose of them by following the
local regulations.
For detail, consult your local distributor, our sales office or your local gov-
ernment.
7.3 DISPOSAL OF USED MAGNETRON
The scanner unit in this radar use a magnetron (NKE-1044A).
● After replacing it, return the used one to your local distributor or our sales
office.
For detail, ask your local distributor or our sales office.
Before disposing of used lithium battery, insulate by affixing tape
to the positive and negative terminals or by other means. Other-
wise, short-circuiting may occur, resulting in heat generation,
bursting or ignition.
CAUTION